ULTEM™ 1000P200 General Purpose Non Reinforced Powder Form PEI Resin

Spherical Shape with Average Particle Size between 200 ~ 450 micron

ULTEM™ 1000P200 PEI Powder is developed for applications that require flexibility in Particle Size without Losing Processing Stability. This Non Reinforced Polyetherimide Powder expands usability across a wider range of Powder Based manufacturing Methods.

with a Spherical Particle Structure Ranging from 200 to 450 Microns, ULTEM™ 1000P200 PEI Powder provides a Broader Distribution compared to Fixed Size Powders. This allows improved Packing behaviour during Processing while maintaining consistent Flow during Handling.

the Particle System is designed to Adapt. Smaller Particles Support Tighter Packing. Larger Particles Help maintain Flow Stability. Together, ULTEM™ 1000P200 PEI Powder offers a balanced Response in applications where uniform consolidation is required without Sacrificing Movement during Feeding.

ULTEM™ 1000P200 PEI Powder retains a Glass Transition Temperature of approximately 217 °C, allowing components to remain Stable under Elevated Thermal Conditions. Structural Integrity is preserved even when exposed to repeated Heating Cycles.

the material maintains the Characteristic Transparent Amber appearance, supporting consistency across applications where material Identity or Optical behaviour is Relevant.
Because of its Wider Particle range, ULTEM™ 1000P200 PEI Powder is especially suitable for Compression Molding, Sintering, and General Powder Processing Systems, where both Packing Density and Flow behaviour Influence Final Part Performance.

Typical applications include High Temperature components, Powder Processed Parts, engineered Assemblies, and Industrial Systems, where Thermal stability and Adaptable Processing must Work
Together.

Choosing ULTEM™ 1000P200 PEI Powder also reflects a more responsible material selection. Its RoHS Compliant Composition support Environmentally Conscious use while maintaining High Performance capability.

Notes :

ULTEM™ 1000P200 PEI Powder
Spherical Shape
average particle Size between 200 ~ 450 micron
RoHS Compliant

ULTEM™ 1000P200 PEI Resin has Non Listed Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 9

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 13

Material Flexural Modulus

3300

ULTEM™ 1000P200 are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.