ULTEM™ 1010. General Purpose Improved High Flow, FAR Compliance Resin

Built-in Flame Retardancy with excellent Strength and Modulus at elevated Temperatures

ULTEM™ 1010 PEI Resin is a High-Performance, General-Purpose Thermoplastic engineered for applications requiring enhanced Flow, High Heat Resistance, and inherent Flame Retardancy. with a Glass Transition Temperature (Tg) of 217°C, it maintains Mechanical Integrity across Elevated Temperature Conditions.

The Amorphous PEI Structure provides High Strength, Stiffness, and Dimensional Stability, allowing components to perform reliably under continuous Thermal and Mechanical Stress. Its improved Flow characteristics enable easier Processing compared to standard Grades, supporting Complex Geometries and Thin-Wall applications.

ULTEM™ 1010 PEI Resin is inherently Flame Retardant and achieves UL94 V0 Ratedfrom 0.75 mm to 3.00 mm, without the use of Halogenated Additives. It also meets FAR 25.853 FST (Flame, Smoke, Toxicity) Requirements, making it suitable for Aerospace Interior and Safety-critical applications.

The material Demonstrates excellent Resistance to UV and Gamma Radiation, ensuring Stable Performance in Sterilization and Radiation-exposed Environments. It also offers a Wide Service Temperature range from -40°C to 180°C, supporting reliable use across Extreme Operating Conditions.

ULTEM™ 1010 PEI Resin provides High Light Transmittance in the Infrared Spectrum, enabling use in specialized Sensing and Optical applications. It is available in Transparent Amber or Opaque Colors, offering Design flexibility for Various Industries.

The Resin complies with Halogen-Free Standards including IEC 61249-2-21, IPC 4101E, and JEDEC JS709B, supporting Environmentally Conscious and Safety-Driven material selection.

This Unique ULTEM™ 1010 PEI Resin is Ideal for Aerospace Interiors, Electrical Insulation Systems, Connectors, Medical components, and High-Temperature Structural applications, where Flowability, Flame Resistance, and Thermal Stability are critical.

ULTEM™ 1010 PEI Resin is RoHS Compliant, supporting Environmentally Responsible material selection while delivering High-Performance Thermal and Flame-Retardant Properties.

Notes:

ULTEM™ 1010 PEI Resin
High Flow
FAR Compliance Resin
UL94 V0 Rated
RoHS Compliant

ULTEM™ 1010 PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 17.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 25

Material Flexural Modulus

3300

ULTEM™ 1010 are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.