ULTEM™ 1010F PEI Resin. Unreinforced Food Compliance Better Easy Flow

Inherent FR, ECO Conforming, U.S. FDA and EU Food Contact Compliant

ULTEM™ 1010F PEI Resin is built around Certified Performance. designed for applications that must meet Strict Regulatory Standards, this Transparent Amber Polyetherimide combines Thermal capability with Globally Recognized Compliance.

the advance ULTEM™ 1010F PEI Resin meets both U.S. FDA and EU Food contact Requirements, making it suitable for components used in Environments where Safety and material approval are critical. This makes the Grade especially relevant in Systems involving Consumables or Regulated Processing.

Flow behaviour has been optimized to Improve Manufacturability. ULTEM™ 1010F PEI Resin offers enhanced Flow compared to standard Unreinforced PEI, helping Fill Complex Geometries while maintaining consistent Part Quality. This support efficient Molding without Compromising Performance.

Thermal stability remains a defining feature. ULTEM™ 1010F PEI Resin maintains a Glass Transition Temperature of approximately 217 °C, allowing Parts to retain Mechanical Strength under continuous Heat exposure. components maintain integrity in demanding Temperature Environments.

the material is also inherently Flame Retardant, achieving UL94 V0 Ratedfrom 0.75 mm to 3.00 mm. This support use in applications where Flame Performance is essential while avoiding Additive Based Systems.

in addition to Food Compliance, ULTEM™ 1010F PEI Resin meets FAR 25.853 Requirements, enabling use in Aerospace Interior applications where Fire, Smoke, and Toxicity Standards must be met.

it is important to Note that while ULTEM™ 1010F PEI Resin is Certified for Food Contact, it does not Carry Medical Biocompatibility Certification, and Therefore is not Intended for Medical Implantation or Similar Regulated Uses.

Typical applications include Food contact components, Aerospace Interior Parts, Electrical Housings, and High Temperature Assemblies, where Compliance, Thermal Stability, and Processability must Work Together.

Selecting ULTEM™ 1010F PEI Resin reflects a Forward Thinking Approach to material use. Its ECO Conformance and RoHS Compliant formulation Support Responsible Design while maintaining High Performance capability.

Notes :

ULTEM™ 1010F PEI Resin
Easy Flow
ECO Conforming
U.S. FDA and EU Food Contact Compliant
UL94 Rated
RoHS Compliant

ULTEM™ 1010F PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 17.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 25

Material Flexural Modulus

3300

ULTEM™ 1010F are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.