ULTEM™ 1010P General Purpose Non Reinforced Powder Form FR PEI Resin

Advanced Spherical Shape with Average Particle Size of 350 micron

ULTEM™ 1010P PEI Powder is developed for applications that require reliable Powder Handling with Built in Flame Performance. This Non Reinforced Polyetherimide is supplied in a Spherical Particle Form, offering Stable Processing behaviour across a Wide range of Powder Based manufacturing Systems.

this Special ULTEM™ 1010P PEI Powder features an average Particle Size of approximately 350 Microns, providing a Good balance between Flow stability and Packing Efficiency. The Spherical Geometry support Smooth Movement during Feeding, reducing Irregular Flow while allowing consistent material Distribution.

ULTEM™ 1010P PEI Powder is inherently Flame Retardant. This eliminates the need for additional Additives while maintaining clean material Performance. Safety Performance remains consistent across Different Processing Conditions.

Thermal capability remains a Defining Property. ULTEM™ 1010P PEI Powder retains a Glass Transition Temperature of approximately 217 °C, allowing components to maintain Structural Integrity under Elevated Temperatures. This support use in repeated Thermal Cycles without Significant Loss of Mechanical Performance.

ULTEM™ 1010P PEI Powder is offered in Transparent Amber or Opaque Variants, allowing adaptation to different application Needs without affecting Core material Performance.

Because of its balanced Particle Structure and inherent Flame Resistance, ULTEM™ 1010P PEI Powder is suitable for Compression Molding, Sintering, Coating, and General Powder Processing Systems, where consistent Flow and Thermal reliability are required.

Typical applications include High Temperature components, Electrical Parts, Powder Processed Assemblies, and Flame Sensitive Environments, where Safety Performance and Processing stability must Work Together.

Choosing ULTEM™ 1010P PEI Powder also reflects a Responsible material Decision. Its RoHS Compliant Composition support Environmentally Conscious use while maintaining High Performance Engineering capability.

Notes :

ULTEM™ 1010P PEI Powder
Advanced Spherical Shape with average Particle Size of 350 micron
RoHS Compliant

ULTEM™ 1010P PEI Resin has Non Listed Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 17.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 25

Material Flexural Modulus

3300

ULTEM™ 1010P are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.