ULTEM™ 1010P200 General Purpose Non Reinforced Powder Form PEI Resin

Spherical Shape with Average Particle Size between 200 ~ 450 micron

ULTEM™ 1010P200 PEI Resin is a High-Performance Non-Reinforced Polyetherimide material Supplied in Powder Form, Designed for applications requiring High Thermal Stability, Controlled Particle Size, And Flexible Processing Methods. With a Glass Transition Temperature (Tg) Of 217°C, It maintains Mechanical Integrity in High-Temperature Environments.

The Advanced Powder Morphology features a Spherical Particle Structure, Supporting consistent Flow and uniform Distribution in Powder-Based Processing applications such as Coating, Sintering, And Additive manufacturing.

ULTEM™ 1010P200 PEI Resin provides reliable Mechanical Strength, Dimensional Stability, And inherent Flame Retardancy, Ensuring Stable Performance across a Wide range of Industrial applications.

The Unique formulation includes a Lower Molecular Weight compared to ULTEM™ 1000P Grades, Enabling improved Flow behavior and Processing Efficiency in Powder-Based Systems.

ULTEM™ 1010P200 PEI Resin offers a controlled Particle Size Distribution, With an Average Particle Size (D50) Of approximately 200 Microns and a Maximum Particle Size (D100) Of approximately 450 Microns, Supporting Specific Application Requirements.

The material is available in Transparent Amber or Opaque Colors, Maintaining the Typical Visual characteristics of PEI while supporting Functional Processing Needs.
ULTEM™ 1010P200 PEI Resin is Ideal for Powder Coating, Additive manufacturing, Thermal Processing, And Industrial applications, Where controlled particle behavior and thermal stability are essential.

It is not UL Rated, As the material is optimized for Powder Processing applications rather than standard Flame Classification.
This Resin is RoHS Compliant, Supporting Environmentally Responsible material selection while delivering reliable High-Temperature Performance and Processing flexibility in Powder Form.

Notes:

ULTEM™ 1010P200 PEI Resin
Powder Form Spherical Shape
Average Particle Size between 200 ~ 450 micron
RoHS Compliant

ULTEM™ 1010P200 PEI Resin has Non Listed Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 17.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 25

Material Flexural Modulus

3300

ULTEM™ 1010P200 are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.