ULTEM™ 1010R Non Reinforced Easy Release Enhanced Flow FAR PEI Resin

High-Flow PEI with Built-In Release for Complex Part Manufacturing

ULTEM™ 1010R PEI Resin is a High-Performance, Non-Reinforced Polyetherimide material designed for applications requiring enhanced Flow, Easy Release Processing, And Aerospace Flame Compliance. With a Glass Transition Temperature (Tg) Of 217°C, It maintains Structural Stability in High-Temperature Environments.

The Advanced material Design provides balanced Mechanical Strength, Dimensional Stability, And improved Processability, Allowing efficient production of Complex and Thin-Walled components.

ULTEM™ 1010R PEI Resin meets FAR 25.853 Requirements, Supporting use in Aerospace applications where Flame, Smoke, And Toxicity Standards are critical.

The Unique formulation incorporates enhanced Flow characteristics combined with Internal Mold Release, Enabling easier Part Ejection, Improved Surface Finish, And Increased production Efficiency.

ULTEM™ 1010R PEI Resin is inherently Flame Retardant and achieves UL94 V0 Ratedfrom 0.75 mm to 3.00 mm, Without the use of Halogenated Additives.

The material is Halogen-Free and complies with Standards including IEC 61249-2-21, IPC 4101E, And JEDEC JS709B, Supporting Environmentally Responsible and Safety-Focused material selection.

ULTEM™ 1010R PEI Resin is available in Opaque Colors, Optimized for applications where Performance and Compliance are Prioritized over Transparency.
It is a Strong Choice for Aerospace components, Electrical Housings, Industrial Parts, And Structural applications, Where High Flow, Flame Performance, And Processing Efficiency are required.

This Resin is RoHS Compliant, Supporting Environmentally Responsible material selection while delivering Aerospace-Grade Performance with improved Flow and easy Release Processing.

Notes:

ULTEM™ 1010R PEI Resin
Easy Release
Enhanced Flow FAR
UL94 Rated
RoHS Compliant

ULTEM™ 1010R PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 17.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 25

Material Flexural Modulus

3300

ULTEM™ 1010R are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.