ULTEM™ 1040A Non Reinforced Transparent Colored High Flow PEI Resin

Inherent Flame Retardancy, Strength & Modulus at elevated Temperature

ULTEM™ 1040A PEI Resin Is A High-Performance, Non-Reinforced Polyetherimide Material Designed For Applications Requiring Advanced High Flow Processing, Thermal Stability, And Reliable Mechanical Performance. It Offers A Balanced Solution For General Engineering Applications.
The Advanced Material Design Features An Optimized High Flow Formulation, Enabling Efficient Mold Filling, Reduced Cycle Time, And Improved Processing Consistency For Complex And Thin-Walled Parts.

ULTEM™ 1040A PEI Resin Delivers Strong Mechanical Properties Including Strength And Dimensional Stability At Elevated Temperatures, Supporting Reliable Performance In Demanding Industrial Environments.

The Unique Formulation Maintains Low Viscosity With Consistent Flow Behavior, Allowing Manufacturers To Achieve Better Part Quality And Surface Finish During Production.

ULTEM™ 1040A PEI Resin Is Inherently Flame Retardant And Provides High Heat Resistance With A Glass Transition Temperature (Tg) Of 217°C, Ensuring durability in high-temperature applications.

The Material Is availableIn Transparent Colors, Supporting Applications That Require Visual Clarity Alongside Engineering Performance.
ULTEM™ 1040A PEI Resin Is Suitable For Electrical Components, Industrial Parts, Housings, And General Engineering Applications, Where processing efficiency and thermal stability are critical.

It Is Not UL Rated, As The Material Is Optimized For Processing Performance And General Engineering Use Rather Than Flame Classification.
This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering High Flow Efficiency And Reliable High-Temperature Performance.

Notes:

ULTEM™ 1040A PEI Resin
Transparent Colored
High Flow
RoHS Compliant

ULTEM™ 1040A PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

N/a

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 77

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

3505 ( 2.6 mm/min, 100 mm span)

ULTEM™ 1040A are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.