ULTEM™ 1040P General Purpose Non Reinforced Powder Form FR PEI Resin

Developed Spherical Shape with Average Particle Size of 350 micron

ULTEM™ 1040P PEI Resin Is A High-Performance Non-Reinforced Polyetherimide Material Supplied In Powder Form, Designed For Applications Requiring High Thermal Stability, Improved Flow Behavior, And Advanced Powder Processing Capability. With A Glass Transition Temperature (Tg) Of 217°C, It Maintains Reliable Mechanical Performance In Elevated Temperature Environments.

The Advanced Powder Morphology Features A Controlled Spherical Particle Structure, Supporting Consistent Flowability And Uniform Distribution In Processing Methods Such As Coating, Sintering, And Additive Manufacturing.

ULTEM™ 1040P PEI Resin Provides Inherent Flame Retardancy, Mechanical Strength, And Dimensional Stability, Ensuring dependable Performance across a wide range of industrial applications.

The Unique Formulation Includes A Lower Molecular Weight Compared To ULTEM™ 1000P Grades, Resulting In Enhanced Flow Characteristics And Improved Processing Efficiency In Powder-Based systems.

ULTEM™ 1040P PEI Resin Offers A Controlled Particle Size Distribution With Average Particle Size (D50) Of Approximately 350 Microns, Supporting optimized behavior for specific application requirements.

The Material Is availableIn Transparent Amber or Opaque Colors, Maintaining the characteristic appearance of PEI while supporting functional processing needs.

ULTEM™ 1040P PEI Resin Is Suitable For Powder Coating, Thermal Processing, Additive Manufacturing, And Industrial Applications, Where material Flow, thermal Performance, and consistency are critical.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Reliable High-Temperature Performance And Processing Flexibility In Powder Form.

Notes:

ULTEM™ 1040P PEI Resin
Powder Form Spherical Shape
Average Particle Size of 350 micron
RoHS Compliant

ULTEM™ 1040P PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 196

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 295°C/6.6 kgf = 6.6

Material Melt Volume Rate, MVR

Melt Volume Rate, 220°C/5.0 kgf = 10

Material Flexural Modulus

3000

ULTEM™ 1040P are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.