ULTEM™ 1100. General Purpose Non Reinforce Resin. High Pigment Loading

Durable PEI Solution for Continuous Thermal and Mechanical Stress Conditions

ULTEM™ 1100 PEI Resin is a High-Performance, General-Purpose Thermoplastic designed for applications requiring High Heat Resistance, Inherent Flame Retardancy, and enhanced Color capability. with a Glass Transition Temperature (Tg) of 217°C, The material maintains Mechanical Integrity under Elevated Temperature Conditions.

The Amorphous PEI Structure provides High Strength, Stiffness, and Dimensional Stability, enabling reliable Performance in both Thermal and Mechanical Stress Environments. Its balanced Properties make it suitable for a Wide range of Industrial and Electrical applications.

ULTEM™ 1100 PEI Resin is Differentiated by Its High Pigment Loading capability, allowing consistent and Deep Coloration without Compromising Mechanical or Thermal Performance. This Characteristic makes it Ideal for applications requiring both Performance and Aesthetic flexibility.

The material is inherently Flame Retardant and achieves UL94 V0 Ratedfrom 0.75 mm to 3.00 mm, without the use of Halogenated Additives. This ensures reliable Flame Resistance while supporting Compliance with Environmental and Safety Requirements.

ULTEM™ 1100 PEI Resin maintains High Strength and Modulus at Elevated Temperatures, ensuring Structural Stability in demanding Environments. It is available in Transparent Amber or Opaque Colors, providing Design Versatility across Different applications.

The Resin supports Good Processability, enabling efficient Molding of Complex components while maintaining consistent Quality and Performance.
ULTEM™ 1100 PEI Resin is Ideal for Electrical Housings, Connectors, Industrial components, and applications requiring High Heat Resistance with Color flexibility, where Flame Retardancy and Mechanical Strength are critical.

ULTEM™ 1100 PEI Resin is RoHS Compliant, supporting Environmentally Responsible material selection while delivering reliable High-Temperature and Flame-Retardant Performance.

Notes:

ULTEM™ 1100 PEI Resin
High Pigment Loading
UL94 V0 Rated
RoHS Compliant

ULTEM™ 1100 PEI Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 198

Vicat Softening Temperature Rate

N/a

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 8.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 21

Material Flexural Modulus

N/a

ULTEM™ 1100 are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.