ULTEM™ 1110. General Purpose Non Reinforce Resin. High Pigment Loading

Improved Flow features, Strength & Modulus at elevated Temperature

ULTEM™ 1110 PEI Resin, General Purpose, Non Reinforced Polyetherimide is developed for applications that require High Heat Resistance together with consistent Molding behaviour.

The Advance ULTEM™ 1110 PEI Resin is defined by a Glass Transition temperature of approximately 217 °C, allowing components to retain Strength and Rigidity at Elevated Temperatures. Parts maintain shape under Heat. Mechanical stability remains reliable in demanding Environments.

Processing is equally important. ULTEM™ 1110 PEI Resin offers improved Flow characteristics, making it easier to Fill Complex Geometries compared to Traditional High Temperature Materials. Molded Parts achieve better Detail Definition. Cycle consistency improves during production.

ULTEM™ 1110 PEI Resin, High Pigment Loading capability support Strong and uniform Coloration without compromising material Performance. This makes it particularly useful in applications where appearance must be controlled alongside Engineering properties.

This Resin maintains Strength and Modulus, allowing components to perform Structurally even under prolonged Thermal exposure. This combination of Flow and Strength helps balance Manufacturability with Durability.

ULTEM™ 1110 PEI Resin is classified as UL94-V0, 0.75 mm ~ 3.00 mm Rated, supporting applications that require reliable Flame Resistance at Thin Wall Sections.

Typical applications include Electrical components, High Temperature Housings, Colored Functional Parts, and Precision Molded Assemblies, where Thermal Stability, Processing Ease, and Visual consistency must Work Together.

Selecting ULTEM™ 1110 PEI Resin also reflects a Responsible material Choice. Its RoHS Compliant formulation support Environmentally Conscious Design while maintaining Advanced Engineering Performance.

Notes :

ULTEM™ 1110 PEI Resin
High Pigment Loading
Improved Flow, Strength & Modulus
UL94 Rated
RoHS Compliant

ULTEM™ 1110 PEI Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 200

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 21

Material Flexural Modulus

3300

ULTEM™ 1110 are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.