ULTEM™ 1110F. Food Contact Non Reinforced Resin. High Pigment Loading

Improved Flow features, Strength & Modulus at elevated Temperature

ULTEM™ 1110F PEI Resin Is A High-Performance, Non-Reinforced Polyetherimide Material Developed For Applications Requiring Food Contact Compliance, Enhanced Flow, And Reliable Thermal Stability. It Combines Strong Mechanical Performance With Improved Processability For A Wide Range Of Engineering Uses.

Optimized For Manufacturing Efficiency, This Grade Delivers Improved Flow Behavior Compared To Standard Pigment Series, Allowing Better Mold Filling And Consistent Production Of Complex or Thin-Walled Components.

ULTEM™ 1110F PEI Resin meets Food Contact Compliance Standards Including U.S. FDA, EU Regulations, And NSF 51 Listing, Supporting Safe Use In Regulated Applications And Food-Related Systems.

A Distinct Advantage Of This Resin Lies In Its High Pigment Loading Capability, Enabling Deep, Uniform Coloration While Maintaining Strength, Dimensional Stability, And Thermal Performance.

ULTEM™ 1110F PEI Resin Is Inherently Flame Retardant And Achieves UL94 V0 RatedFrom 0.75 mm To 3.00 mm, Providing Reliable Flame Resistance Without The Use Of Halogenated Additives.

Designed As An ECO Conforming Material, It Supports Halogen-Free Compliance According To IEC 61249-2-21, IPC 4101E, And JEDEC JS709B, Making It Suitable For Environmentally Responsible Applications.

ULTEM™ 1110F PEI Resin Is availableIn Transparent Amber or Opaque Colors, Offering Flexibility For Both Functional Components And Aesthetic Design Requirements.

It Is Widely Used In Food Processing Equipment, Electrical Components, Connectors, And Consumer Products, Where compliance, Flow efficiency, and color Performance are critical.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Food Safety, Enhanced Processability, And High-Temperature Performance.

Notes:

ULTEM™ 1110F PEI Resin
Food Contact
High Pigment Loading
Improved Flow
UL94 Rated
RoHS Compliant

ULTEM™ 1110F PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 200

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 21

Material Flexural Modulus

3300

ULTEM™ 1110F are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.