BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ULTEM™ 2100. 10% Glass Reinforced PEI Resin. ECO Conforming NSF Listed
Standard Flow & WRAS Certified in Recognized Colors. High Glass Tg
ULTEM™ 2100 PEI Resin is a High-Performance Engineering Thermoplastic reinforced with 10% Glass Fiber, designed for applications requiring enhanced Rigidity, Dimensional Stability, and reliable Thermal Performance. ULTEM™ 2100 PEI Resin delivers a balanced combination of Strength and Processability, making it suitable for demanding Industrial Environments where consistent Mechanical Performance is essential.
The Glass-Reinforced PEI Structure in ULTEM™ 2100 PEI Resin provides improved Stiffness, Higher Modulus, and reduced Creep, enabling components to maintain Dimensional Accuracy under Mechanical Load and Elevated Temperatures. ULTEM™ 2100 PEI Resin supports Precision Parts and Structural Applications where Long-Term Stability and Tight Tolerances remain Critical Requirements.
ULTEM™ 2100 PEI Resin offers inherent Flame Retardant Properties and achieves UL94 V0 Ratedfrom 0.41 mm to 3.00 mm without Halogenated Additives. This capability allows ULTEM™ 2100 PEI Resin to deliver reliable Performance in Electrical Components, Industrial Systems, and Applications requiring Flame Resistance and Safety Compliance.
With High Strength and Rigidity at Elevated Temperatures, ULTEM™ 2100 PEI Resin provides Long-Term Thermal Stability in Continuous Use Conditions. Compared to Unreinforced Grades, ULTEM™ 2100 PEI Resin delivers improved Dimensional Control and Mechanical Performance in High-Load and High-Temperature Environments.
ULTEM™ 2100 PEI Resin is certified to NSF 51 and WRAS Standards in Approved Colors, making ULTEM™ 2100 PEI Resin suitable for Applications involving Contact with Drinking Water and Food-Related Systems under controlled Conditions.
The Standard Flow Characteristics of ULTEM™ 2100 PEI Resin enable consistent Processing while maintaining Reinforced Mechanical Properties. As part of the ULTEM™ 2000 Series, ULTEM™ 2100 PEI Resin offers enhanced Rigidity and Dimensional Stability compared to the ULTEM™ 1000 Series, making it a preferred choice for Structural and Load-Bearing Applications.
ULTEM™ 2100 PEI Resin is widely used in Industrial Components, Fluid Handling Systems, Electrical Housings, and Structural Parts where Strength, Stability, and Compliance must be maintained. ULTEM™ 2100 PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering Reinforced High-Performance Characteristics.
Notes:
ULTEM™ 2100 PEI Resin
10% Glass Reinforced
ECO Conforming NSF Listed
WRAS Certified
UL94 V0 Rated
RoHS Compliant
ULTEM™ 2100 PEI Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
N/a
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 212
Material MFI / Melt Flow Rate
N/a
Material Melt Volume Rate, MVR
Melt Volume Rate, 360°C/5.0 kgf = 9
Material Flexural Modulus
4500
ULTEM™ 2100 are UL94 - V0, 0.41 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.