ULTEM™ 2100F 10% Glass Reinforced Food Contact FDA Compliant PEI Resin

Greater Rigidity. Standard Flow, FDA NSF 5.1 Listed & WRAS Certified

ULTEM™ 2100F PEI Resin Is A High-Performance Engineering Thermoplastic Reinforced With 10% Glass Fiber, Designed For Applications Requiring Food Contact Compliance, Structural Strength, And Reliable Thermal Performance. It Combines Reinforced mechanical properties with regulatory compliance for demanding environments.

Engineered For Structural Stability, This Grade Provides Enhanced Rigidity, Increased Modulus, And Improved Dimensional Control, making it suitable for precision components under mechanical and thermal stress.

ULTEM™ 2100F PEI Resin meets Global Food Contact Standards Including U.S. FDA, EU Regulations, NSF 51 Listing, And WRAS Certification, ensuring safe use in regulated food and water-related applications.

A Key Advantage Of This Material Is Its Glass Reinforcement Combined With Standard Flow Characteristics, enabling consistent molding Performance while maintaining structural integrity.

ULTEM™ 2100F PEI Resin Achieves UL94 V0 Flame RatedFrom 0.41 mm To 3.00 mm, delivering reliable flame resistance without halogenated additives.

Designed To Support Long-Term Use, The Resin Offers Good Heat Resistance And Dimensional Stability, making it suitable for Elevated temperature applications in industrial and fluid-contact systems.

ULTEM™ 2100F PEI Resin Is availableIn Opaque Colors, supporting applications where mechanical Performance and compliance are prioritized over transparency.

It Is Widely Used In Food Processing Equipment, Water Handling Systems, Electrical Components, And Structural Parts, where strength, compliance, and durability are essential.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Reinforced Performance And Food-Grade Compliance.

Notes:

ULTEM™ 2100F PEI Resin
10% Glass Reinforced
Food Contact FDA
FDA NSF 5.1 Listed & WRAS Certified
UL94 Rated
RoHS Compliant

ULTEM™ 2100F PEI Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 212

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 9

Material Flexural Modulus

4500

ULTEM™ 2100F are UL94 - V0, 0.41 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.