ULTEM™ 2100R 10% Glass Fiber Reinforced PEI Resin. Added Mold Release

Greater Rigidity. Improved Dimensional Stability and Standard Flow

ULTEM™ 2100R PEI Resin Is A High-Performance Engineering Thermoplastic Reinforced With 10% Glass Fiber, Developed For Applications Requiring Enhanced Rigidity, Dimensional Stability, And Reliable High-Temperature Performance. With A Glass Transition Temperature (Tg) Of 217°C, It Maintains Structural Integrity In Demanding Environments.

Optimized For Processing Efficiency, This Grade Incorporates Internal Mold Release Technology, Enabling Easier Part Ejection, Reduced Cycle Time, And Improved Surface Consistency During Manufacturing.

ULTEM™ 2100R PEI Resin Delivers High Stiffness, Strength, And Improved Dimensional Control, Making It Suitable For Structural Components Operating Under Mechanical Load And Thermal Stress.

A Key Advantage Of This Material Is Its Combination Of Glass Reinforcement With Standard Flow Characteristics, Providing A Balance Between Structural Performance and processability.

ULTEM™ 2100R PEI Resin Is Inherently Flame Retardant And Achieves UL94 V0 RatedFrom 0.41 mm To 3.00 mm, Ensuring Reliable flame Performance without halogenated additives.

The Resin Provides Consistent Performance At Elevated Temperatures With Reduced Creep, Supporting long-term durability in industrial and electrical applications.

ULTEM™ 2100R PEI Resin Is availableIn Opaque Colors, supporting applications where strength, stability, and processing efficiency are prioritized.

It Is Suitable For Industrial Components, Electrical Housings, Structural Parts, And Precision Applications, where reinforced mechanical Performance and ease of processing are required.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Reinforced Strength, Flame Resistance, And Processing Efficiency.

Notes:

ULTEM™ 2100R PEI Resin
10% Glass Fiber Reinforced
Easy Release
UL94 Rated
RoHS Compliant

ULTEM™ 2100R PEI Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 208

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 223

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 7.8

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

4500

ULTEM™ 2100R are UL94 - V0, 0.41 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.