ULTEM™ 2110EPR 10% Glass Fiber Reinforced Electroplatability PEI Resin

Enhanced Flow and Easy Release with Improved Dimensional Stability

ULTEM™ 2110EPR PEI Resin Is A High-Performance Engineering Thermoplastic Reinforced With 10% Glass Fiber, Developed For Applications Requiring Enhanced Electroplating Adhesion, High Flow Processing, And Reliable High-Temperature Performance. With A Glass Transition Temperature (Tg) Of 217°C, It Maintains Structural Integrity In Demanding Environments.

Built For Advanced Surface Finishing Applications, This Grade Delivers Significantly Improved Electroplating Performance, enabling stronger metal adhesion and more durable plated layers compared to standard reinforced PEI grades.

ULTEM™ 2110EPR PEI Resin Offers Up To Four Times Higher Plating Adhesion And Approximately 30% Improved Flow Compared To Standard ULTEM™ 2000 Series Materials, allowing better processability alongside enhanced functional Performance.

The Formulation Integrates Internal Mold Release Technology, helping to improve part ejection, reduce cycle times, and maintain consistent surface quality during molding.

ULTEM™ 2110EPR PEI Resin Achieves UL94 V0 Flame RatedFrom 0.40 mm To 3.00 mm, delivering reliable flame Performance without the use of halogenated additives.

This Grade Also Provides High Rigidity, Dimensional Stability, And Resistance To Thermal Deformation, making it suitable for precision structural and plated applications under mechanical and thermal loads.

ULTEM™ 2110EPR PEI Resin Is availableIn Transparent Amber or Opaque Colors, offering flexibility in both design and functional requirements.
It Is Commonly Used In Electroplated Components, Electronic Housings, Automotive Parts, And Decorative-Functional Surfaces, where strong metal adhesion and structural stability are essential.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Advanced Plating Performance, High Flow Efficiency, And Long-Term Durability.

Notes:

ULTEM™ 2110EPR PEI Resin
10% Glass Fiber Reinforced
Electroplatability
Improved Flow
UL94 Rated
RoHS Compliant

ULTEM™ 2110EPR PEI Resin has 0.60 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 205

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 210

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 19

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

5170 ( 2.6 mm/min, 100 mm span)

ULTEM™ 2110EPR are UL94 - V0, 0.40 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.