ULTEM™ 2110R 10% Glass Fiber Reinforced PEI Resin. Added Mold Release

Greater Rigidity. Improved Dimensional Stability and Improved Flow

ULTEM™ 2110R PEI Resin Is A High-Performance Engineering Thermoplastic Reinforced With 10% Glass Fiber, Designed For Applications Requiring Improved Flow, Enhanced Processing Efficiency, And Reliable Structural Performance At Elevated Temperatures. With A Glass Transition Temperature (Tg) Of 217°C, It Maintains Stability Under Thermal And Mechanical Stress.

Optimized For Manufacturing Efficiency, This Grade Combines Improved Flow Behavior With Internal Mold Release Features, Enabling Easier Part Ejection, Reduced Cycle Time, And Consistent Surface Quality During Injection Molding.

ULTEM™ 2110R PEI Resin Provides High Rigidity, Strength, And Dimensional Stability, Making It Suitable For Structural Components And Precision Parts Operating Under Load.

A Key Attribute Of This Resin Is Its Balanced Combination Of Glass Reinforcement And Enhanced Flow, Delivering Better mold fill compared to standard reinforced grades while maintaining mechanical integrity.

ULTEM™ 2110R PEI Resin Achieves UL94 V0 RatedFrom 0.41 mm To 3.00 mm, Ensuring reliable flame resistance without the use of halogenated additives.

The Material Also Offers Good Creep Resistance And Long-Term Thermal Durability, supporting stable Performance in demanding industrial and electrical environments.

ULTEM™ 2110R PEI Resin Is availableIn Opaque Colors, supporting applications where strength, stability, and processing Performance are key priorities.

It Is Commonly Used In Electrical Components, Industrial Parts, Housings, And Structural Applications, where improved Flow, easy release, and reinforced strength are required.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Reinforced Performance, Flame Safety, And Processing Efficiency.

Notes:

ULTEM™ 2110R PEI Resin.
10% Glass Fiber Reinforced
Easy Release
UL94 Rated
RoHS Compliant

ULTEM™ 2110R PEI Resin has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 207

Vicat Softening Temperature Rate

N/a

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 11.5

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

4500

ULTEM™ 2110R are UL94 - V0, 0.41 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.