ULTEM™ 2200F 20% Glass Reinforced Food Contact Compliant PEI Resin

Greater Rigidity. Standard Flow, FDA NSF 5.1 Listed & WRAS Certified

ULTEM™ 2200F PEI Resin Is A High-Performance Engineering Thermoplastic Reinforced With 20% Glass Fiber, Developed For Applications Requiring Food Contact Compliance, High Structural Strength, And Reliable Thermal Stability. It Delivers enhanced rigidity compared to lower glass-filled grades while maintaining process consistency.

Designed For Load-Bearing Environments, The Material Provides Higher Stiffness, Improved Mechanical Strength, And Excellent Dimensional Stability, enabling components to maintain accuracy under thermal and mechanical stress.

ULTEM™ 2200F PEI Resin meets Global Food Contact Standards Including U.S. FDA, EU Regulations, NSF 51 Listing, And WRAS Certification, ensuring safe use in food processing and water-related systems.

A Key Benefit Of This Grade Is Its 20% Glass Reinforcement Combined With Standard Flow Characteristics, allowing precise molding while achieving superior rigidity compared to 10% glass-filled alternatives.

ULTEM™ 2200F PEI Resin Achieves UL94 V0 Flame RatedFrom 0.41 mm To 3.00 mm, providing dependable flame resistance without halogenated additives.

Engineered For Long-Term Reliability, The Material Maintains Thermal Stability And Resistance To Creep, making it suitable for continuous use in Elevated temperature environments.

ULTEM™ 2200F PEI Resin Is availableIn Opaque Recognized Colors, supporting applications where structural Performance and compliance are prioritized over transparency.

It Is Commonly Used In Food Processing Equipment, Fluid Handling Systems, Electrical Components, And Structural Parts, where strength, compliance, and durability are essential.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Reinforced Food-Grade Performance And High-Temperature Stability.

Notes:

ULTEM™ 2200F PEI Resin
20% Glass Reinforced
Food Contact Compliant
FDA NSF 5.1 Listed & WRAS Certified
UL94 Rated
RoHS Compliant

ULTEM™ 2200F PEI Resin has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 212

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 7

Material Flexural Modulus

6500\

ULTEM™ 2200F are UL94 - V0, 0.41 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.