ULTEM™ 2200R 20% Glass Fiber Reinforced PEI Resin. Added Mold Release

Greater Rigidity. Improved Dimensional Stability and Standard Flow

ULTEM™ 2200R PEI Resin is a High-Performance Engineering Thermoplastic reinforced with 20% Glass Fiber, developed for Applications requiring stable Mechanical Strength and controlled Processing Behavior. With a Glass Transition Temperature of 217°C, ULTEM™ 2200R PEI Resin maintains consistent Structural Performance in Environments exposed to sustained Thermal Conditions.

A balanced combination of Reinforcement and Process Stability defines the Material, where Standard Flow Characteristics allow predictable Molding Outcomes across a wide range of Production Conditions. This Stability ensures reliable Part Formation while maintaining the Rigidity and Stiffness expected from Glass-Reinforced PEI Materials.

Compared to Lower-Reinforced Grades, ULTEM™ 2200R PEI Resin provides higher Structural Stiffness and improved Dimensional Control, allowing Components to retain Shape under Mechanical Load and Long-Term Use. This makes the Material suitable for Structural Applications where Accuracy and Load-Bearing Capability remain Critical Requirements.

Processing Efficiency is supported by integrated Easy-Release Behavior, allowing smoother Demolding and reduced Surface Damage. This Feature enables more consistent Production Cycles and improved Part Quality, reducing Waste and supporting High-Volume Manufacturing Performance.

In addition to Mechanical Strength, ULTEM™ 2200R PEI Resin delivers strong Chemical Resistance, allowing Components to withstand exposure to Industrial Fluids and Cleaning Agents without Performance Degradation. Inherent Flame Retardant Properties allow UL94 V0 Classification from 0.41 mm to 3.00 mm, supporting safe use in Applications requiring Fire Resistance.

availablein Opaque Colors, ULTEM™ 2200R PEI Resin is suited for Applications where Structural Reliability and Durability are prioritized over Transparency. Typical Applications include Structural Components, Housings, and Industrial Parts requiring consistent Mechanical Performance and Thermal Stability.

ULTEM™ 2200R PEI Resin provides a reliable balance of Reinforced Strength, predictable Processing, and Thermal Performance. With Chemical Durability, Flame Resistance, and RoHS Compliance, ULTEM™ 2200R PEI Resin supports General Engineering Applications where Stability and Reliability must be delivered together.

Notes:

ULTEM™ 2200R PEI Resin
20% Glass Fiber Reinforced
Added Mold Release
UL94 Rated
RoHS Compliant

ULTEM™ 2200R PEI Resin has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 210

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 220

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 6.5

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

6500

ULTEM™ 2200R are UL94 - V0, 0.41 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.