ULTEM™ 2210. Easy Flow Formulated with 20% Glass Reinforced PEI Resin

Greater Rigidity. Improved Dimensional Stability vs ULTEM 1000 Series

ULTEM™ 2210 PEI Resin is a High-Performance Glass-Reinforced Engineering Thermoplastic containing 20% Glass Fiber, designed for Applications requiring High Rigidity, improved Flow, and excellent Dimensional Stability at Elevated Temperatures. With a Glass Transition Temperature of 217°C, ULTEM™ 2210 PEI Resin maintains reliable Structural Performance under demanding Thermal and Mechanical Conditions.

The Glass-Reinforced Polyetherimide Structure in ULTEM™ 2210 PEI Resin provides High Stiffness, Increased Modulus, and reduced Creep, allowing Components to maintain Tight Tolerances under Continuous Load and Thermal Stress. This optimized Formulation reduces Warpage and improves Part Accuracy compared to Standard Unfilled Grades, making ULTEM™ 2210 PEI Resin suitable for Precision Applications where Stability remains Critical Requirements.

ULTEM™ 2210 PEI Resin offers enhanced Flow Characteristics compared to ULTEM™ 2200 and 1000 Series Resins, enabling easier Processing and efficient production of Complex and Thin-Walled Parts without compromising Mechanical Integrity. This balance of Rigidity and Processability allows ULTEM™ 2210 PEI Resin to support High-Efficiency Manufacturing Environments.

Inherent Flame Retardant Properties allow ULTEM™ 2210 PEI Resin to achieve UL94 V0 Ratedfrom 0.41 mm to 3.00 mm without Halogenated Additives, providing reliable Performance in Electrical, Electronic, and Industrial Applications requiring Flame Resistance. The material also maintains High Strength and Rigidity at Elevated Temperatures, delivering Long-Term Thermal Stability in continuous Operating Conditions.

As part of the ULTEM™ 2000 Series, ULTEM™ 2210 PEI Resin offers superior Stiffness and Dimensional Stability compared to the ULTEM™ 1000 Series, making it suitable for Structural and Load-Bearing Components. The increased Glass Fiber Content enhances Mechanical Performance while supporting Manufacturing Efficiency through improved Material Flow.

ULTEM™ 2210 PEI Resin is available in Opaque Colors and is widely used in Electrical Components, Industrial Parts, Housings, and Precision-Molded Applications where Strength, Stability, and Processability must be delivered together. ULTEM™ 2210 PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering consistent Reinforced High-Performance Characteristics.

Notes:

ULTEM™ 2210 PEI Resin
20% Glass Reinforced
Easy Flow Formulated
UL94 Rated
RoHS Compliant

ULTEM™ 2210 PEI Resin has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 211

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 225

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 8.4

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

6500

ULTEM™ 2210 are UL94 - V0, 0.41 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.