ULTEM™ 2210EPR 20% Glass Fiber Reinforced Electroplatability PEI Resin

Improved Flow, Std Internal Easy Release & Better Dimension Stability

ULTEM™ 2210EPR PEI Resin Is A High-Performance Engineering Thermoplastic Reinforced With 20% Glass Fiber, Designed For Applications Requiring Superior Electroplating Adhesion, High Flow Processability, And Structural Strength At Elevated Temperatures. With A Glass Transition Temperature (Tg) Of 217°C, It Maintains Mechanical Integrity Under Demanding Conditions.

Developed For Advanced Surface Finishing, This Grade Enables Significantly Enhanced Metal Plating Performance, allowing stronger adhesion and improved durability of plated layers in both functional and decorative applications.

ULTEM™ 2210EPR PEI Resin Delivers Up To Four Times Higher Plating Adhesion And Approximately 30% Improved Flow Compared To Standard ULTEM™ 2000 Reinforced Grades, providing a unique combination of process efficiency and surface Performance.

A Key Advantage Of This Material Is Its Integration Of Internal Mold Release With Electroplating Optimization, allowing smooth processing, easier demolding, and consistent surface readiness for plating operations.

ULTEM™ 2210EPR PEI Resin Achieves UL94 V0 Flame RatedFrom 0.40 mm To 3.00 mm, ensuring reliable flame resistance without halogen-based additives.

In Addition To Plating Benefits, The Material Offers High Rigidity, Improved Dimensional Stability, And Strong Mechanical Performance, making it suitable for precision structural components under thermal and mechanical stress.

ULTEM™ 2210EPR PEI Resin Is availableIn Opaque Colors, supporting applications where structural Performance and surface finishing are equally critical.

It Is Commonly Used In Electroplated Components, Automotive Parts, Electronic Housings, And Decorative Functional Surfaces, where adhesion, Flow, and dimensional stability are essential.

This Resin Is RoHS Compliant, Supporting Environmentally Responsible Material Selection While Delivering Advanced Plating Performance, Structural Strength, And Processing Efficiency.

Notes:

ULTEM™ 2210EPR PEI Resin
20% Glass Fiber Reinforced
Electroplatability
Improved Flow
UL94 Rated
RoHS Compliant

ULTEM™ 2210EPR PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 206

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 210

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 13

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

6890 ( 2.6 mm/min, 100 mm span )

ULTEM™ 2210EPR are UL94 - V0, 0.40 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.