ULTEM™ 2300R 30% Glass Fiber Reinforced PEI Resin. Added Mold Release

Increased Stiffness. Enhanced Shape Retention and Regular Output

ULTEM™ 2300R PEI Resin is a High-Performance Engineering Thermoplastic reinforced with 30% Glass Fiber, developed for Applications requiring High Rigidity and excellent Thermal Stability. With a Glass Transition Temperature of 217°C, ULTEM™ 2300R PEI Resin maintains Structural Integrity under Elevated Heat and Mechanical Stress, making it suitable for demanding Engineering Environments.

A key characteristic of ULTEM™ 2300R PEI Resin lies in its High Reinforcement Level, which provides exceptional Stiffness and Load-Bearing Capability. This allows Components to retain Shape and Dimensional Accuracy during Long-Term Use, especially in Structural Applications where Mechanical Strength remains Critical Requirements.

Compared across the PEI Material Family, ULTEM™ 2300R PEI Resin is positioned as a High-Rigidity, General-Purpose Grade. While other Grades may focus on Regulatory Compliance or enhanced Flow Performance, this Material emphasizes Structural Strength and Dimensional Stability for Industrial Applications requiring reliable Mechanical Performance.

Balanced Flow Characteristics allow effective Mold Filling while maintaining Reinforced Structural Performance. This Processing Behavior supports consistent Manufacturing Output and enables production of Parts with Complex Geometries without compromising Mechanical Integrity.

Manufacturing Efficiency is further supported by favorable Mold Release Behavior, allowing smoother Demolding and reduced Risk of Surface Defects. This contributes to improved Cycle Stability, better Surface Finish, and consistent Part Quality in High-Volume Production Environments.

In addition to Mechanical Strength, ULTEM™ 2300R PEI Resin offers strong Chemical Resistance, allowing Components to withstand exposure to Industrial Fluids and Cleaning Agents without Performance Degradation. Inherent Flame Retardant Properties enable UL94 V0 Classification from 0.25 mm to 3.00 mm, supporting Applications requiring Safety and Flame Resistance. ULTEM™ 2300R PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection.

Supplied in Opaque Color Options, ULTEM™ 2300R PEI Resin is suited for Applications where Structural Durability and Mechanical Reliability are prioritized over Transparency. Typical Applications include Housings, Brackets, Structural Supports, and Components used in Industrial Equipment and Electronic Systems.

ULTEM™ 2300R PEI Resin provides a reliable combination of High Stiffness, Thermal Resistance, and consistent Processing Performance. With strong Reinforcement, Chemical Durability, Flame Retardant Capability, and Regulatory Compliance, ULTEM™ 2300R PEI Resin remains a dependable Material Choice for General Engineering and Industrial Applications.

Notes:

ULTEM™ 2300R PEI Resin
30% Glass Fiber Reinforced
Added Mold Release
UL94 Rated
RoHS Compliant

ULTEM™ 2300R PEI Resin has 0.20 ~ 0.40 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 211

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 213

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 5

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 6

Material Flexural Modulus

9600

ULTEM™ 2300R are UL94 - V0, 0.25 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.