ULTEM™ 2310. 30% Glass Reinforced Aerospace FAR Compliant PEI Resin

Improved High Flow, Better Dimensional Stability vs ULTEM 1000 Series

ULTEM™ 2310 PEI Resin is developed for applications where Certification, Strength, and Dimensional Control must align under demanding Conditions. As a 30% Glass Reinforced Polyetherimide, this Grade is positioned for Structural Performance in Environments that require both Reliability and Compliance.

The Unique ULTEM™ 2310 PEI Resin meets FAR 25.853 requirements, making it suitable for Aerospace and Transportation applications where Flame, Smoke, and Toxicity Performance are Critical. This Certification support use in Regulated Environments where material Selection must meet Strict Safety Standards.

ULTEM™ 2310 PEI Resin delivers High Stiffness with reduced deformation under Load. components maintain Shape even during extended Exposure to Stress. Dimensional stability improves compared to Unfilled Grades, especially when compared to ULTEM™ 1000 Series.

Processing is supported by an improved High Flow Formulation, allowing the material to Fill Complex Geometries more efficiently. This helps maintain consistency in Molding while preserving the benefits of High Glass Loading.

ULTEM™ 2310 PEI Resin features a Glass Transition Temperature of approximately 217 °C, enabling Stable Mechanical Performance in High Temperature Environments. Structural Integrity is retained even under Prolonged Heat Exposure.

From a Safety Standpoint, ULTEM™ 2310 PEI Resin is Classified as UL94 V0, 0.25 mm ~ 3.00 mm Rated, supporting use in applications requiring Flame Resistance at Thin Wall Sections.

Typical applications include Aerospace Interior Components, Structural Housings, Electrical Systems, and High Precision Assemblies, where Strength, Compliance, and Dimensional Accuracy must Work Together.

Selecting ULTEM™ 2310 PEI Resin also reflects a Responsible Engineering Choice. its RoHS Compliant formulation aligns High Performance Requirements with Environmentally Conscious material Selection.

Notes :
ULTEM™ 2310 PEI Resin
30% Glass Reinforced
UL94 Rated
ROHS Compliant

ULTEM™ 2310 PEI Resin has 0.20 ~ 0.40 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 211

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 213

Material MFI / Melt Flow Rate

Melt Flow Rate, 337°C/6.6 kgf = 7.6

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

9600

ULTEM™ 2310 are UL94 - V0, 0.25 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.