ULTEM™ 2400F 40% Glass Reinforced Food Contact Compliant FDA PEI Resin

Greater Rigidity. Standard Flow, FDA NSF 5.1 Listed & WRAS Certified

ULTEM™ 2400F PEI Resin is a High-Performance Engineering Thermoplastic reinforced with 40% Glass Fiber, designed for Applications requiring Maximum Strength, Exceptional Dimensional Stability, and full Food Contact Compliance. With a Glass Transition Temperature of 217°C, ULTEM™ 2400F PEI Resin maintains Structural Integrity under Extreme Thermal and Mechanical Conditions, supporting reliable Performance in demanding Environments.

A key characteristic of ULTEM™ 2400F PEI Resin is its Heavy-Duty Mechanical Capability, where High Reinforcement enables Very High Stiffness, Superior Modulus, and excellent Load-Bearing Performance. This allows Components to perform reliably in Structural Applications exposed to Continuous Stress and harsh Operating Conditions.

Global Food Contact Compliance enables ULTEM™ 2400F PEI Resin to meet U.S. FDA, EU Regulations, NSF 51 Requirements, and WRAS Certification Standards, allowing safe use in Food Processing Equipment and Potable Water Systems. This Regulatory Alignment supports Applications where Safety, Hygiene, and Long-Term Reliability remain Critical Requirements.

The combination of 40% Glass Reinforcement and Stable Standard Flow Characteristics allows ULTEM™ 2400F PEI Resin to deliver the highest Rigidity within Food-Grade ULTEM Materials while maintaining consistent Processability. This Balance supports efficient Manufacturing without sacrificing Structural Performance.

Outstanding Dimensional Stability and Long-Term Creep Resistance allow Components to retain Precision and Shape over extended Service Life. This Performance ensures reliable Operation in Applications requiring Tight Tolerances and sustained Mechanical Load.

Inherent Flame Retardant Properties enable ULTEM™ 2400F PEI Resin to achieve UL94 V0 Rating from 0.25 mm to 3.00 mm without Halogenated Additives, supporting safe Performance in Applications requiring Flame Resistance and Material Stability.

availablein Opaque Recognized Colors, ULTEM™ 2400F PEI Resin is also offered as ULTEM™ HU2400, providing additional Options within the Reinforced Food-Grade Series for specific Application Requirements.

Typical Applications include Food Processing Equipment, Fluid Handling Systems, Structural Components, and High-Load Industrial Systems where Maximum Strength, Dimensional Stability, and Regulatory Compliance must be delivered together. ULTEM™ 2400F PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering High-Level Reinforced Performance, Food Safety Compliance, and Thermal Stability.

Notes:

ULTEM™ 2400F PEI Resin
40% Glass Fiber Reinforced
Electroplatability
Improved Flow
US FDA and EU Food Contact Compliant
NSF 51 Listing & WRAS Certification
UL94 Rated
RoHS Compliant

ULTEM™ 2400F PEI Resin has 0.10 ~ 0.30 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 217

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 5.2

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 5

Material Flexural Modulus

10000

ULTEM™ 2400F are UL94 - V0, 0.25 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.