ULTEM™ 2410 is PEI Resin with 40% Glass Fiber Reinforced Improved Flow

High-Flow Reinforced Performance with Exceptional Rigidity and Dimensional Stability

ULTEM™ 2410 PEI Resin is a High-Performance Engineering Thermoplastic reinforced with 40% Glass Fiber, designed for applications requiring High Flow, Exceptional Rigidity, and Superior Dimensional Stability at Elevated Temperatures. With a Glass Transition Temperature of 217°C, ULTEM™ 2410 PEI Resin maintains Structural Integrity in demanding Thermal Environments, making it suitable for advanced Structural and Industrial Applications.

The Highly Reinforced PEI Structure in ULTEM™ 2410 PEI Resin provides Very High Stiffness, Increased Modulus, and excellent Creep Resistance, allowing components to maintain Tight Tolerances under Continuous Mechanical Load. The use of Milled Glass Reinforcement enhances Dimensional Control and Structural Performance, supporting Precision Parts where Stability and Alignment remain Critical Requirements.

ULTEM™ 2410 PEI Resin offers improved Flow Characteristics compared to ULTEM™ 2300 and 1000 Series, enabling efficient Processing and better Mold Filling for Complex and Thin-Walled Components without compromising Mechanical Strength. This balance of Flow and Reinforcement allows ULTEM™ 2410 PEI Resin to deliver both Manufacturing Efficiency and High Structural Performance.

Inherent Flame Retardant Properties enable ULTEM™ 2410 PEI Resin to achieve UL94 V0 Ratedfrom 0.25 mm to 3.00 mm without added Flame Retardant Modifiers. This ensures reliable Flame Performance while maintaining Clean Material Composition, supporting Electrical Components and Applications requiring Safety Compliance.

High Strength and Rigidity at Elevated Temperatures, combined with Long-Term Thermal Stability, allow ULTEM™ 2410 PEI Resin to perform reliably under Continuous Use Conditions. The material is optimized for Structural and High-Load Applications where both Mechanical Performance and Processability must be maintained.

As part of the ULTEM™ 2000 Series, ULTEM™ 2410 PEI Resin offers Significantly Improved Rigidity and Dimensional Stability compared to the ULTEM™ 1000 Series, while also providing Enhanced Flow for Manufacturing Efficiency. These characteristics make ULTEM™ 2410 PEI Resin a preferred choice for Reinforced High-Performance Components.

ULTEM™ 2410 PEI Resin is available in Opaque Colors, supporting Applications focused on Structural Performance, Strength, and Long-Term Durability in demanding Environments.

Typical Applications for ULTEM™ 2410 PEI Resin include Aerospace Components, Structural Parts, Electrical Housings, and High-Precision Industrial Applications, where High Strength, Flame Resistance, and Flow Performance must be delivered together. ULTEM™ 2410 PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering Ultra-High Reinforced Performance with improved Processability.

Notes:

ULTEM™ 2410 PEI Resin
40% Glass Fiber Reinforced
Improved Flow
UL94 Rated
RoHS Compliant

ULTEM™ 2410 PEI Resin has 0.10 ~ 0.30 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 212

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 234

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 5.2

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

10000

ULTEM™ 2410 are UL94 - V0, 0.25 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.