ULTEM™ 2410R with 40% Glass Reinforced PEI Resin. Added Mold Release

Increased Stiffness. Enhanced Shape Retention and Better Output

ULTEM™ 2410R PEI Resin is a High-Performance Engineering Thermoplastic reinforced with 40% Glass Fiber, designed for Applications requiring Maximum Rigidity, improved Flow Processing, and reliable High-Temperature Performance. With a Glass Transition Temperature of 217°C, ULTEM™ 2410R PEI Resin maintains Structural Stability under demanding Thermal and Mechanical Conditions.

A key focus of ULTEM™ 2410R PEI Resin is Processing Efficiency, where enhanced Flow Characteristics combined with Internal Mold Release allow smoother Mold Filling and easier Part Ejection. This Processing Advantage supports improved Production Consistency and reduced Cycle Variability, especially in High-Volume Manufacturing Environments.

The high Glass Fiber Content enables ULTEM™ 2410R PEI Resin to deliver Very High Stiffness, Strength, and Dimensional Stability, allowing Components to maintain Tight Tolerances under Mechanical Load. This Structural Capability makes the Material suitable for Load-Bearing Applications requiring Long-Term Reliability.

A balanced combination of Reinforcement and Flow Improvement allows ULTEM™ 2410R PEI Resin to achieve better Moldability compared to Standard 40% Reinforced Grades while maintaining strong Mechanical Performance. This Balance supports efficient Manufacturing without compromising Structural Integrity.

Inherent Flame Retardant Properties enable ULTEM™ 2410R PEI Resin to achieve UL94 V0 Rating from 0.25 mm to 3.00 mm without Halogenated Additives, supporting safe Performance in Applications requiring Flame Resistance and Material Compliance.

Excellent Creep Resistance and Long-Term Thermal Stability allow ULTEM™ 2410R PEI Resin to maintain consistent Mechanical Performance over extended Service Life. This ensures reliable operation in Industrial and Electrical Environments exposed to Continuous Stress and Elevated Temperatures.

availablein Opaque Colors, ULTEM™ 2410R PEI Resin is optimized for Applications where Structural Strength and Processability are Primary Requirements. Typical Applications include Structural Components, Electrical Housings, Industrial Equipment Parts, and Precision Components requiring High Stiffness, Efficient Processing, and Durability.

ULTEM™ 2410R PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering Maximum Reinforced Strength, improved Flow Performance, and reliable High-Temperature Stability.

Notes:

ULTEM™ 2410R PEI Resin
40% Glass Reinforced
Improved Flow
Easy Release
UL94 Rated
RoHS Compliant

ULTEM™ 2410R PEI Resin has 0.10 ~ 0.30 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 212

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 234

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 5.5

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

10000

ULTEM™ 2410R are UL94 - V0, 0.25 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.