BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ULTEM™ 4000 Glass Reinforced PEI Resin. PTFE and Graphite Filler added
Durable Low-Friction Solution for Industrial and Mechanical Systems
ULTEM™ 4000 PEI Resin is a High-Performance Engineering Thermoplastic Reinforced with Glass Fiber, PTFE, And Graphite, Designed for applications requiring Low Friction, High Wear Resistance, And reliable Mechanical Strength. The Advanced Tribological formulation enables Long-Term Performance in Dynamic and High-Load Systems.
The Hybrid Reinforcement System combines Glass Fiber for Structural Rigidity, Graphite for Lubricity, And PTFE for reduced Coefficient of Friction, Creating a material that Performs Efficiently in Sliding and Wear-Critical applications. This Synergy enhances Service Life and reduces Maintenance Requirements.
ULTEM™ 4000 PEI Resin delivers excellent Wear Resistance and Low Friction Performance, Making it suitable for Bearings, Bushings, Gears, And Moving components. Its standard Flow characteristics Support consistent Processing while maintaining Reinforced Mechanical Properties.
The material provides High Strength, Excellent Dimensional Stability, And Good Creep Resistance at Elevated Temperatures, Ensuring reliable Performance in demanding Thermal and Mechanical Environments.
ULTEM™ 4000 PEI Resin achieves UL94 V0 Ratedat 0.84 mm, Providing High-Level Flame Retardant Performance without the use of added Flame Retardant Modifiers.
The Resin is available in Opaque Reinforced Formulations, Optimized for applications where Mechanical Strength, Wear Resistance, And Durability are critical.
ULTEM™ 4000 PEI Resin is Ideal for Bearings, Bushings, Wear components, Industrial Equipment, And High-Load Mechanical Systems, Where Low Friction, Wear Resistance, And Thermal Stability must be Delivered Together.
ULTEM™ 4000 PEI Resin is RoHS Compliant, Supporting Environmentally Responsible material selection while delivering Advanced Tribological and Structural Performance.
Notes:
ULTEM™ 4000 PEI Resin
Glass, PTFE and Graphite Filler Reinforced
Advanced Wear Resistance
Reduced Coefficient of Friction
UL94 Rated
RoHS Compliant
ULTEM™ 4000 PEI Resin has 0.10 ~ 0.30 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 212
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 233
Material MFI / Melt Flow Rate
Melt flow Rate, 337°C/6.6 kgf = 3.1
Material Melt Volume Rate, MVR
N/a
Material Flexural Modulus
7000
ULTEM™ 4000 are UL94 - V0, 0.84 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.