ULTEM™ 9075 Advanced Non Reinforced Certified FAR High Flow PEI Resin

Advanced Material Compliant with Aerospace Fire Safety Regulations

ULTEM™ 9075 PEI Resin is a High-Performance Polyetherimide Blend engineered for applications requiring High Flow, Low Smoke Emission, and Advanced Flame, Smoke, and Toxicity (FST) Performance. It is specifically designed for Aerospace and Transportation Systems where Safety and Compliance are critical.

The Advanced PEI Blend Structure provides balanced Mechanical Strength, Dimensional Stability, and enhanced Processability, enabling reliable Performance in Complex and Thin-Walled components. Its High Flow characteristics Support efficient manufacturing for Precision applications.
ULTEM™ 9075 PEI Resin meets FAR 25.853 Requirements and OSU 65/65 Standards, Along with Compliance to ABD and NBS Test Methods, ensuring Low Flame Spread, reduced Smoke Generation, and Low Toxic Gas Emission in Fire Conditions.

The Unique formulation enables stable Performance across a Wide Temperature range, maintaining Mechanical Integrity in Aerospace Interiors and Transportation Systems under Thermal Stress.

ULTEM™ 9075 PEI Resin is designed as a Halogen-Free and ECO Conforming material, supporting Environmentally Responsible selection while maintaining High Flame Performance without the use of Halogenated Additives.

This material is available in Transparent Amber or Opaque Colors, providing flexibility for Design and Application Requirements across Multiple Industries.

ULTEM™ 9075 PEI Resin is Ideal for Aerospace Interior components, Rail Systems, Electrical Housings, and Structural applications, where FST Compliance and High Flow are required.

It is not UL Rated, as the material is specifically optimized for Aerospace FST Standards rather than Conventional UL Flame Classifications.

This Resin is RoHS Compliant, supporting Environmentally Responsible material selection while delivering Advanced Flame, Smoke, and Toxicity Performance.

Notes:

ULTEM™ 9075 PEI Resin
High Flow
FAR 25.853, OSU 65/65
RoHS Compliant

ULTEM™ 9075 PEI Resin has 0.60 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 188

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 200

Material MFI / Melt Flow Rate

Melt flow Rate, 295°C/6.6 kgf = 2.4

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 15

Material Flexural Modulus

3200

ULTEM™ 9075 are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.