ULTEM™ ATX200F Non Reinforced High Flow, US FDA Compliant PEI Blend

Solid Pigmented. Superior Thermal Resistance relative to standard Polyetherimide

ULTEM™ ATX200F PEI Blend Resin is a High-Performance Engineering Material based on a Polyetherimide and Polycarbonate‑Ester Blend, developed for Applications requiring Food Contact Compliance, High Impact Strength, and Enhanced Flow Processability. ULTEM™ ATX200F PEI Blend Resin combines Durability, Toughness, and Regulatory Compliance, supporting reliable Performance in demanding and regulated Environments.

A key characteristic of ULTEM™ ATX200F PEI Blend Resin is its improved Impact Resistance, allowing Components to withstand repeated Handling, Mechanical Stress, and incidental Impact without compromising Structural Integrity. This Performance makes the Material suitable for Applications requiring both Strength and Long-Term Reliability.

Compliance with U.S. FDA Food Contact Requirements allows ULTEM™ ATX200F PEI Blend Resin to support safe use in Food Service Equipment, Consumer Products, and Regulated Systems. This Certification ensures the Material meets strict Hygiene and Safety Standards in Food-Related Environments.

Enhanced Flow Characteristics allow efficient Processing of Complex Geometries, enabling consistent Mold Filling while maintaining Surface Quality and Structural Stability. This Processing Capability supports Manufacturing Efficiency and consistent Part Performance across Production Cycles.

Inherent Flame Retardant Properties allow ULTEM™ ATX200F PEI Blend Resin to achieve UL94 V0 Rating from 1.50 mm to 3.00 mm without Halogenated Additives, supporting reliable Flame Performance and Material Safety in Applications requiring Fire Resistance.

The Material provides Intermediate Hydrolytic Stability and good Resistance to Stains and Chemicals, allowing reliable Performance in Environments exposed to Moisture, Cleaning Agents, and Food Contact Conditions. This ensures consistent Operation in real-world Use Scenarios where Durability remains Critical Requirements.

availablein Opaque Colors, ULTEM™ ATX200F PEI Blend Resin supports Applications where Durability, Hygiene Compliance, and Visual Appearance must be balanced. This allows flexibility in Design while maintaining Core Mechanical and Functional Properties.

Typical Applications include Food Service Equipment, Automotive Interior Parts, Consumer Products, and Decorative Functional Components where Impact Strength, Processability, and Regulatory Compliance must be delivered together. ULTEM™ ATX200F PEI Blend Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering Food Safety, High Impact Performance, and enhanced Processing Efficiency.

Notes:

ULTEM™ ATX200F PEI Blend
US FDA Compliant
Opaque Colored
High Flow
UL94 Rated
RoHS Compliant

ULTEM™ ATX200F PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 210

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 24

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

3100

ULTEM™ ATX200F are UL94 - V0, 1.5 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.