ULTEM™ ATX200R Non Reinforced Enhanced High Flow, High Heat PEI Blend

Easy Release. Better Heat performance compared to ULTEM 1000™ Resin

ULTEM™ ATX200R PEI Blend Resin is a High-Performance Engineering Material based on a Polyetherimide and Polycarbonate‑Ester Blend, developed for Applications requiring Enhanced Flow, Outstanding Impact Strength, and efficient Processing Performance. ULTEM™ ATX200R PEI Blend Resin combines Toughness with Manufacturing Efficiency, allowing reliable Performance in demanding Industrial Environments.

Engineered for real Production Conditions, the Material delivers High Impact Resistance alongside improved Processability, allowing Components to withstand Mechanical Stress while maintaining consistent Quality during Complex Molding Operations. This Balance supports Applications where both Durability and Manufacturing Stability remain Critical Requirements.

Enhanced Flow Characteristics combined with Internal Mold Release enable smoother Mold Filling and easier Part Ejection during Processing. ULTEM™ ATX200R PEI Blend Resin allows reduced Cycle Times and improved Production Efficiency while maintaining consistent Surface Quality and Structural Integrity across Manufacturing Runs.

A notable advantage of ULTEM™ ATX200R PEI Blend Resin is its capability for Metallization without Primer, allowing simplified Surface Finishing Processes. This Feature enables high-quality Decorative Coatings and Functional Surface Treatments with strong Adhesion and durable Performance.

Inherent Flame Retardant Properties allow ULTEM™ ATX200R PEI Blend Resin to achieve UL94 V0 Rating from 1.50 mm to 3.00 mm without Halogenated Additives, supporting reliable Flame Performance and Material Safety in Applications requiring Compliance and Protection.

The Material provides Intermediate Hydrolytic Stability, along with good Chemical Resistance and improved Stain Resistance compared to Standard ULTEM™ 1000 Grades. This Performance ensures long-term Durability in Environments exposed to Moisture, Cleaning Agents, and Industrial Chemicals.

availablein Opaque Colors, ULTEM™ ATX200R PEI Blend Resin supports Applications where Mechanical Strength, Processing Efficiency, and Surface Finishing Flexibility are essential. This allows Design Freedom while maintaining consistent Functional Performance.

Typical Applications include Automotive Components, Industrial Parts, Consumer Products, and Food-Service Related Equipment where Impact Strength, High Flow, and ease of Processing must be delivered together. ULTEM™ ATX200R PEI Blend Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering High Impact Performance, enhanced Processing Efficiency, and versatile Surface Finishing Capability.

Notes:

ULTEM™ ATX200R PEI Blend
Enhanced High Flow
Easy Release
RoHS Compliant

ULTEM™ ATX200R PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 200

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 26.5

Material Melt Volume Rate, MVR

N/a

Material Flexural Modulus

3100

ULTEM™ ATX200R are UL94 - V0, 1.5 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.