ULTEM™ ATX3562R 50% Glass & Mineral Reinforced PEI Blend. High Impact

Enhanced High Flow, AddedEasy Release and Better Heat performance

ULTEM™ ATX3562R PEI Blend Resin Targets applications that demand Maximum Rigidity without Sacrificing Toughness. Built with 50% combined Glass and Mineral Reinforcement, this material is engineered to deliver Exceptional Structural Strength while maintaining Resistance to Impact.

this PEI Blend Resin behaves Differently from Typical High Filled Materials. The Reinforcement System increases Stiffness Significantly, yet the formulation preserves High Impact Strength, allowing components to withstand Mechanical Stress without Brittle Failure.

ULTEM™ ATX3562R PEI Blend Resin improves Processing through enhanced Flow characteristics. even with High Filler content, the material Fills Molds efficiently. Complex Geometries can be achieved with Greater Consistency, reducing the Challenges usually associated with Heavily Reinforced Systems.

Ejection Performance is also optimized. The Integrated Mold Release feature enables Smoother Demoulding, helping reduce Sticking and improving Cycle Efficiency during production.

ULTEM™ ATX3562R PEI Blend Resin provides reliable Heat Resistance, allowing Parts to maintain Structural Integrity when exposed to Elevated Temperatures during Service.

Dimensional stability is a key Outcome of the Hybrid Reinforcement System. ULTEM™ ATX3562R PEI Blend Resin Limits Warpage and maintains Tight Tolerances, even in Large or Load Bearing components where consistency is critical.

ULTEM™ ATX3562R PEI Blend Resin is available in Opaque Color options, providing uniform appearance suitable for Structural and Industrial applications.

Typical uses include Heavy Duty Structural Parts, High Load Housings, Industrial Equipment components, and Reinforced Assemblies, where Stiffness, Toughness, and Thermal Performance must Work Together without Compromise.

Environmental Expectations are supported through RoHS aligned formulation, helping Integrate material Performance with Responsible Design Practices.

Notes:

ULTEM™ ATX3562R PEI Blend Resin
50% Glass & Mineral Reinforced
High Impact
Enhanced High Flow
Easy Release
RoHS Compliant

ULTEM™ ATX3562R PEI Resin has 0.20 ~ 0.30 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 183

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 187

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 20

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 20

Material Flexural Modulus

13550

ULTEM™ ATX3562R are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.