ULTEM™ AUT195M Non Reinforced High Flow PEI Resin. Automotive Lighting

Developed for Metalizing and High Reflective Surface. Low Easy Release

ULTEM™ AUT195M PEI Blend Resin is a High-Performance Polyetherimide-Based Material developed for Automotive Lighting Systems requiring precise Surface Quality and strong Reflective Performance. ULTEM™ AUT195M PEI Blend Resin combines High Flow Processing with controlled Material Behavior, allowing reliable manufacturing of Optical Components where Visual Precision remains Critical Requirements.

The formulation is carefully engineered to reduce Internal Mold Release, enabling improved Surface Integrity and enhanced Downstream Finishing Results. This controlled Processing Behavior allows Components to achieve smoother Surfaces and better Coating Performance, especially in Applications where Appearance directly influences Functional Output.

Consistent High Flow Characteristics allow ULTEM™ AUT195M PEI Blend Resin to support efficient Molding of Complex Lighting Geometries while maintaining Tight Dimensional Accuracy. This Processing Capability ensures stable Production Results and reliable Formation of intricate Design Features.

A key advantage of ULTEM™ AUT195M PEI Blend Resin is its compatibility with Metallization Processes, allowing strong Adhesion of Reflective Coatings. This Feature supports Applications such as Bezels and Reflectors where Optical Efficiency and Surface Reflectivity are Essential Performance Factors.

Thermal Performance remains stable, with a Haze Onset Temperature of 195°C allowing ULTEM™ AUT195M PEI Blend Resin to maintain Optical Stability in High-Heat Lighting Environments. This ensures consistent Light Performance and Material Reliability during extended Operation.

Careful Material Design minimizes Outgassing and Plate-Out, allowing improved Mold Cleanliness and consistent Surface Quality across Production Runs. This Processing Stability supports High-Volume Manufacturing where Efficiency and Repeatability remain important Requirements.

availablein Transparent Amber and Opaque Options, ULTEM™ AUT195M PEI Blend Resin provides flexibility for Designs requiring specific Optical or Reflective Characteristics. This allows Designers to optimize Performance based on Lighting System Requirements.

ULTEM™ AUT195M PEI Blend Resin enables Manufacturers to achieve improved Surface Results, stronger Metallized Finishes, and consistent Processing Performance in Automotive Lighting Components. The Material is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering stable Optical Performance and reliable Surface Quality.

Notes:

ULTEM™ AUT195M PEI Resin
High Flow
Automotive Lighting
Developed for Metalizing and High Reflective Surface
RoHS Compliant

ULTEM™ AUT195M PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 187

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 200

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 24

Material Melt Volume Rate, MVR

Melt Volume Rate, 340°C/5.0 kgf = 16

Material Flexural Modulus

3100

ULTEM™ AUT195M are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.