ULTEM™ AUT200 Non Reinforced High Flow PEI Resin. Automotive Lighting

Developed for Metalizing and High Reflective Surface Requirement

ULTEM™ AUT200 PEI Resin is designed for applications where Light Management and Surface Functionality must Work Together. developed specifically for Automotive Lighting Systems, this Non‑Reinforced Polyetherimide Blend support both Optical Performance and manufacturing Efficiency.

The Unique ULTEM™ AUT200 PEI Resin delivers High Flow behaviour, allowing the material to Fill Complex Geometries with Minimal Resistance. Fine Optical features form more accurately, which is Essential for Lighting components that require precise Surface Definition.

ULTEM™ AUT200 PEI Resin provides a surface that support Reflective Coatings, enabling the production of High‑Reflectivity components used in Lighting Systems. This makes it suitable for applications where controlled Reflection and Light Direction are critical.

Thermal Performance is tailored for Lighting Environments. ULTEM™ AUT200 PEI Resin features a Haze Onset Temperature of approximately 204 °C, helping maintain Optical Clarity under prolonged Heat exposure. This ensures stability in components exposed to continuous Illumination and Elevated Temperatures.

ULTEM™ AUT200 PEI Resin also maintains the inherent Advantages of the PEI Platform, including High Mechanical Strength and Flame Retardancy. This support Durability in demanding Automotive Environments.

The material is available in Transparent Amber and Opaque Color options, allowing flexibility Depending on Optical Design or Structural Requirements.

Typical applications include Automotive Lighting Housings, Reflectors, Optical components, and Metallized Parts, where Clarity, Heat Resistance, and Surface Performance must align.

Use of ULTEM™ AUT200 PEI Resin Fits well within Modern Design Requirements, where Performance must meet both Functional and Environmental Expectations through RoHS‑Aligned material Standards.

Notes:

ULTEM™ AUT200 PEI Resin
Developed for Metalizing
High Reflective Surface Requirement
RoHS Compliant

ULTEM™ AUT200 PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 17.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 25

Material Flexural Modulus

3300

ULTEM™ AUT200 are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.