ULTEM™ AUT200M Non Reinforced High Flow PEI Resin. Automotive Lighting

Developed for Metalizing and High Reflective Surface. Low Easy Release

ULTEM™ AUT200M PEI Resin is designed for applications where Surface Quality and controlled Processing must be balanced carefully. developed for Automotive Lighting Systems, this Non Reinforced Polyetherimide Blend focuses on Optical Performance while allowing Fine Control during Molding.

ULTEM™ AUT200M PEI Resin offers High Flow characteristics, enabling the Formation of Detailed Geometries with consistent Accuracy. Optical features can be Replicated Precisely, which is critical for Lighting components that Depend on controlled Light Direction and Reflection.

Surface behaviour is Tuned Differently from easier Release Grades. ULTEM™ AUT200M PEI Resin provides a Lower Level of Mold Release, allowing improved Surface Integrity during Forming. This helps maintain Smoothness and Consistency, which is important for components that Will Undergo Metallization or Reflective Coating Processes.

The material is well suited for High Reflectivity applications. ULTEM™ AUT200M PEI Resin support Metallization, enabling the Creation of Reflective Surfaces required in Automotive Lighting Assemblies. The controlled Release Characteristic helps preserve Surface Quality Prior to Coating.

Thermal Stability remains aligned with PEI Performance. ULTEM™ AUT200M PEI Resin performs reliably under Elevated Temperatures typically Encountered in Lighting Environments, maintaining both Dimensional Integrity and Optical behaviour.

The material is available in Transparent Amber and Opaque Colors, providing flexibility Depending on Whether Clarity or Structural Function is prioritized in the Design.

Typical applications include Automotive Reflectors, Lighting Housings, Optical components, and Metallized Parts, where Surface Precision, Flow behaviour, and Reflective Performance must Work Together.

Environmental Considerations are addressed through RoHS aligned material Standards, supporting Responsible Integration into Modern Automotive Systems.

Notes:

ULTEM™ AUT200M PEI Resin
Automotive Lighting
High Flow
Developed for Metalizing and High Reflective Surface
Low Easy Release
RoHS Compliant

ULTEM™ AUT200M PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 340°C/5.0 kgf = 13

Material Flexural Modulus

3300

ULTEM™ AUT200M are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.