ULTEM™ AUT210 Non Reinforced High Flow PEI Resin. Automotive Lighting

Enhanced Surface Control for High Reflectivity and Coating Efficiency

ULTEM™ AUT210 PEI Blend Resin is designed for Automotive Lighting applications where High Optical Stability and consistent Processing Performance are Required. as a Non‑Reinforced Polyetherimide Blend, it supports Precision components used in Reflective and Light-Management Systems.

In Lighting Design, maintaining Clarity under Heat is Critical. This material addresses that need with a High Haze Onset Temperature of 212°C, helping Ensure stable Optical behaviour even in Demanding Thermal Environments such as Headlamp or Interior Lighting Systems.

ULTEM™ AUT210 PEI Blend Resin Flows Easily during Molding, allowing Complex Shapes and Thin Sections to be formed without Excessive Injection Pressure. This makes it particularly useful for Intricate Reflector Geometries and Detailed Lighting Features.

From a Surface Finishing Perspective, the Resin Performs well in Metallization Processes, enabling the Development of Reflective Layers that are Essential for Light Efficiency and Visual Performance.

ULTEM™ AUT210 PEI Blend Resin maintains its Thermal Integrity while supporting reliable Dimensional Control, ensuring that Parts remain consistent even when exposed to Prolonged Heat Cycles.

The formulation is also tuned to Minimize Process-Related Issues such as Outgassing or Deposit Build‑Up, helping maintain Cleaner Tooling Conditions over continuous Production Runs.

ULTEM™ AUT210 PEI Blend Resin is availablein Transparent Amber Form, making it suitable for applications where controlled Light Interaction or Aesthetic appearance is Important.

In Practice, this allows manufacturers to Produce Lighting components that Combine Thermal Stability, Reflective Performance, and consistent Molding Behaviour—Critical Factors in Automotive Lighting Systems.

RoHS Compliance Further supports Responsible material Selection, while maintaining the Performance required for Advanced Lighting applications.

Notes:

ULTEM™ AUT210 PEI Resin
High Flow
Automotive Lighting
Developed for Metalizing and High Reflective Surface
RoHS Compliant

ULTEM™ AUT210 PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 201

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 212

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 16

Material Flexural Modulus

3140

ULTEM™ AUT210 are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.