BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ULTEM™ CRS5011 Non Reinforce Transparent Chemical Resistance PEI Resin
High Flow Formulated. High Heat, Hydrolytic and Chemical Stability
ULTEM™ CRS5011 PEI Resin is a High-Performance Non-Reinforced Polyetherimide Material developed for Applications requiring excellent Chemical Resistance combined with improved Processing Efficiency. ULTEM™ CRS5011 PEI Resin is designed to perform reliably in Harsh Environments where Exposure to aggressive Chemicals and consistent Manufacturing Performance remain Critical Requirements.
The Material demonstrates strong Resistance to Acids, Bases, Aromatics, and Ketones, allowing Components to maintain Structural Integrity under severe Chemical Exposure. This Performance enables reliable use of ULTEM™ CRS5011 PEI Resin in Applications where standard Engineering Plastics would experience Degradation or Loss of Function.
Enhanced Flow Characteristics allow ULTEM™ CRS5011 PEI Resin to improve Mold Filling in Complex Geometries and Thin-Walled Sections compared to earlier Grades. This Processing Advantage supports efficient Manufacturing while maintaining core Chemical Resistance Properties required for demanding Industrial Applications.
Mechanical Stability is maintained even under combined Thermal and Chemical Stress, allowing Components to perform consistently in Elevated Temperature Conditions. This ensures reliable Operation in Laboratory, Industrial, and Processing Environments where Durability and Performance remain Essential.
Inherent Flame Retardant Properties allow ULTEM™ CRS5011 PEI Resin to achieve UL94 V0 Rating from 1.50 mm to 3.00 mm without Halogenated Additives, supporting safe Performance in Applications requiring Flame Resistance and Material Compliance.
Stable Molding Behavior enables repeatable Production and consistent Part Quality, reducing Variation in Manufacturing Processes. This Processing Consistency ensures reliable Output in Applications where Dimensional Accuracy and Chemical Performance must be maintained together.
Available in Transparent Amber and Opaque Options, ULTEM™ CRS5011 PEI Resin provides flexibility for Designs requiring Visual Inspection or specific Aesthetic Requirements. This allows adaptation across different Industrial and Technical Applications.
ULTEM™ CRS5011 PEI Resin enables Manufacturers to produce Components with high Chemical Resistance and improved Processing Efficiency, supporting both Performance Reliability and streamlined Manufacturing Operations. ULTEM™ CRS5011 PEI Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering durable Performance in Chemically Aggressive Environments.
Notes:
ULTEM™ CRS5011 PEI Resin
Transparent Ambre
Chemical Resistance
High Flow Formulated
UL94 Rated
RoHS Compliant
ULTEM™ CRS5011 PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 204
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 215
Material MFI / Melt Flow Rate
Melt flow Rate, 337°C/6.6 kgf = 11
Material Melt Volume Rate, MVR
Melt Volume Rate, 360°C/5.0 kgf = 20
Material Flexural Modulus
2900
ULTEM™ CRS5011 are UL94 - V0, 1.5 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.