BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ULTEM™ DT1810EV Non Reinforced Transparent, High Heat PEI Blend Resin
Easy Release, Unique Improved Ductility and Enhanced Hydrostability
ULTEM™ DT1810EV PEI Blend Resin is a Transparent Polyetherimide-Based Optical Material designed for Applications where controlled Light Transmission, High Thermal Stability, and enhanced Toughness are required. This Material supports advanced Optical Systems by combining Optical Functionality with durable Mechanical Performance under demanding Conditions.
A distinctive aspect of ULTEM™ DT1810EV PEI Blend Resin lies in its selective Optical Behavior. The Material enables high Transmission in the Infrared Range while limiting Transmission in the Visible Spectrum, allowing precise Control of Light Interaction in Systems such as Sensors and Communication Devices. This Optical Selectivity supports improved Signal Accuracy and Functional Efficiency.
Mechanical Properties are tailored to address typical limitations of Optical Materials. Increased Ductility and improved Impact Resistance allow Components to withstand Mechanical Stress without Brittle Failure, ensuring reliable Performance in delicate or High-Precision Designs.
Performance Stability under Moisture Exposure is another key capability. Enhanced Hydrolytic Stability allows the Material to maintain Optical and Structural Integrity in Humid Conditions, Washdown Environments, and repeated Exposure to Moisture without degradation.
Inherent Flame Retardant Properties allow ULTEM™ DT1810EV PEI Blend Resin to achieve UL94 V0 Rating at 3.00 mm, supporting Application Requirements where Fire Safety and Optical Performance must coexist.
Processing Behavior remains consistent, allowing stable Melt Flow and reliable Clarity during Molding. This enables precise Manufacturing of Lenses, Optical Interconnect Components, and other High-Detail Parts where Surface Quality and Optical Accuracy are essential.
The Transparent Formulation supports Applications requiring controlled Light Transmission, enabling Designers to optimize Optical Performance without compromising Mechanical Strength or Thermal Reliability.
Typical Applications include IR Sensors, Optical Transceivers, and Photonic Components where Optical Selectivity, Dimensional Stability, and Mechanical Durability must be delivered together. ULTEM™ DT1810EV PEI Blend Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering a balanced combination of Optical Performance, Toughness, and Environmental Resistance.
Notes:
ULTEM™ DT1810EV PEI Blend Resin
Transparent Amber
High Heat
Easy Release
Unique improved Ductility
Enhanced Hydrostability
UL94 Rated
RoHS Compliant
ULTEM™ DT1810EV PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 192
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 192
Material MFI / Melt Flow Rate
Melt flow Rate, 337°C/6.6 kgf = 43
Material Melt Volume Rate, MVR
Melt Volume Rate, 360°C/5.0 kgf = 56
Material Flexural Modulus
3100
ULTEM™ DT1810EV are UL94 - V0, 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.