ULTEM™ HU1000 Non Reinforced, Transparent, USP Class VI PEI Resin

Resistance for repeated Sterilization Cycles Medical applications

ULTEM™ HU1000 PEI Resin Is A Medical-Grade Polyetherimide Material Designed For Applications Requiring Biocompatibility, Sterilization Resistance, And Reliable Performance In Healthcare Environments. It Is Developed To Meet The Demands Of Medical Devices And Pharmaceutical Systems.

In regulated applications, material selection is often driven by compliance requirements. This grade meets ISO 10993 And USP Class VI Standards, ensuring suitability for components that come into direct or indirect contact with patients or pharmaceutical processes.

ULTEM™ HU1000 PEI Resin Supports A Wide Range Of Sterilization Methods, Including Steam, Gamma Radiation, Ethylene Oxide (EtO), Hydrogen Peroxide, UV‑C, And E‑Beam, allowing repeated sterilization cycles without significant degradation of material properties.

Chemical resistance is another important factor in medical environments. The material offers good resistance to cleaning agents and disinfectants, helping maintain long-term integrity in frequently sanitized systems.

ULTEM™ HU1000 PEI Resin Is Inherently Flame Retardant And Achieves UL94 V0 RatedFrom 0.75 mm To 3.00 mm, supporting safety requirements alongside its medical-grade Performance.

From a processing standpoint, the resin provides stable molding characteristics and consistent dimensional behavior, enabling reliable production of precision medical components.

ULTEM™ HU1000 PEI Resin Is availableIn Transparent Amber or Opaque Options, supporting both visibility-based designs and structural medical applications.

In practice, this allows developers to select a single material that can withstand sterilization, meet regulatory standards, and maintain Performance throughout repeated medical use cycles.

Developed To Comply With RoHS Standards For Responsible Material Selection.

Notes:

ULTEM™ HU1000 PEI Resin
USP Class VI
Resistance for Repeated Sterilization Cycles
UL94 Rated
RoHS Compliant

ULTEM™ HU1000 PEI Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 9

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 13

Material Flexural Modulus

3300

ULTEM™ HU1000 are UL94 - V0, 0.75 mm ~ 3.00 mm Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.