BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
ULTEM™ HU2200 20% Glass Reinforced PEI. USP Class VI, Transparent
Resistance for repeated Sterilization Cycles Medical applications
ULTEM™ HU2200 PEI Resin is designed for Medical applications where Mechanical Strength must be maintained through repeated Sterilization Cycles. This 20% Glass Reinforced Polyetherimide combines Structural Rigidity with Healthcare Compliance, making it suitable for demanding Device Environments.
ULTEM™ HU2200 reinforces Performance through its Glass Fiber content. components maintain Shape under Load. stability improves in Larger or more Complex Geometries where Unfilled Materials May Deform during use or Sterilization.
ULTEM™ HU2200 PEI Resin is Qualified to USP Class VI Standards, supporting use in Medical and Pharmaceutical Environments requiring validated material Safety. This makes it suitable for components that Interact with Regulated Systems or require Proven Biocompatibility for Indirect Contact.
Sterilization Resistance is a key advantage. The material performs reliably across Multiple Sterilization Cycles, maintaining Mechanical Integrity without Significant degradation. This allows Longer Service Life in Reusable Medical components.
ULTEM™ HU2200 PEI Resin follows a standard Flow Profile, providing consistent Molding behaviour for Precision components. Dimensional Control is maintained, even when subjected to Heat and repeated Cleaning Cycles.
Thermal capability is aligned with the PEI Platform. ULTEM™ HU2200 PEI Resin operates with a Glass Transition Temperature Near 217 °C, supporting Performance in High Temperature Sterilization Environments.
from a Fire Performance Perspective, ULTEM™ HU2200 PEI Resin achieves UL94 V0, 0.41 mm ~ 3.00 mm Rated, enabling use in applications requiring reliable Flame Resistance in Thin Sections.
the material is available in Transparent Amber and Opaque Color options, allowing flexibility Depending on Device Design and Functional Visibility Requirements.
Typical applications include Medical Device Housings, Sterilisable Structural components, Pharmaceutical Equipment, and Precision Assemblies, where Compliance, Strength, and Durability must Work Together over repeated use Cycles.
Environmental Considerations are addressed through RoHS Compliant material Standards, supporting Integration into Regulated Healthcare and Industrial Systems.
Notes:
ULTEM™ HU2200 PEI Resin
USP Class VI, Transparent
20% Glass Reinforced
Resistance for repeated Sterilization Cycles
UL94 Rated
RoHS Compliant
ULTEM™ HU2200 PEI Resin has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 208
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 212
Material MFI / Melt Flow Rate
Melt flow Rate, 337°C/6.6 kgf = 6
Material Melt Volume Rate, MVR
Melt Volume Rate, 360°C/5.0 kgf = 7
Material Flexural Modulus
6890
ULTEM™ HU2200 are UL94 - V0, 0.41 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.