ULTEM™ XP110 Foam. Non Reinforced 100 kg/m³. Outstanding Lighweight

Superior Flame, Smoke & Toxicity Performance. Good Chemical Resistance

ULTEM™ XP110 PEI Foam is engineered for applications where Weight Reduction Directly improves System Performance. This Non Reinforced Polyetherimide Foam combines Extremely Low Density with Strong Mechanical Behaviour, making it suitable for Aerospace and Advanced Engineering Structures.

This Advance PEI Foam operates at a Lightweight Density of approximately 100–110 kg/m³, significantly reducing mass compared to Solid Materials. Despite its Low Weight, the foam maintains High Strength to Weight Performance, enabling Structural Efficiency in Load Sensitive Applications.

ULTEM™ XP110 PEI Foam meets FAR 25.853 requirements, supporting use in Aerospace Environments where Flame, Smoke, and Toxicity (FST) performance is critical. The material is designed to limit Flame Spread and reduce Smoke Generation during Exposure.

Chemical Durability support Long Term Use. ULTEM™ XP110 PEI Foam shows Broad Resistance to Chemicals, allowing it to perform in Environments where Exposure to Fluids or Cleaning Agents is expected.

The Foam exhibits Low Water Absorption and does not Support Mold or Fungus Growth, making it suitable for Environments with Humidity or Fluctuating Conditions.

ULTEM™ XP110 PEI Foam maintains stability across a Wide Temperature Range, supporting Structural use in Dynamic Operating Environments.

Because of its Cellular Structure, the material provides additional benefits such as Insulation, Weight Optimization, and Impact Absorption, making it Adaptable to a Wide range of Engineering Designs.

Typical applications include Aircraft Interiors, Transportation Panels, Lightweight Structural Cores, Insulation Components, and Specialized Industrial Assemblies, where reducing Weight without compromising performance is essential.

ULTEM™ XP110 PEI Foam is RoHS Compliant, supporting Environmentally Responsible material use while delivering Advanced Performance in Regulated Industries.

Notes:

ULTEM™ XP110 Foam
Non Reinforced 100 kg/m³
Outstanding Lighweight
Superior Flame, Smoke & Toxicity Performance
Good Chemical Resistance
ROHS Compliant

ULTEM™ XP110 PEI Resin has Non Listed Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

N/A

ULTEM™ XP110 are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.