BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
VALOX™ 176 PBT Resin General Purpose Unreinforced. Ease of Processing
Natural Color for Blends/Compounding. High Heat, Chemical Resistance
VALOX™ 176 PBT Resin is a General Purpose Resin for Wide Fiber or Compounding Applications
It is from the Family of VALOX™, a Blend of Plastic consist of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages
VALOX™ 176 PBT Resin can be used to Create High Strength, Lightweight Materials that are Resistant to Wear and Tear.
These properties make the Compounds suitable for use in a Wide Range of Applications, including Automotive, Aerospace, and Sporting goods.
Valox PBT resin for Fibers is Typically supplied in the Form of Granules or Pellets and can be Processed using Various Techniques such as Melt Spinning, Drawing, or Braiding to create the Finished Fibers.
As a Blend VALOX™ 176 PBT Resin may offers
- Thermal Stability - High Heat Deflection Temperature, High Relative Temperature Index
- Excellent Chemical Resistance - Excellent Resistance to a Variety of Chemical such as Hydrocarbons, Dilute Acids, Detergents, and Most Aqueous Salt Solutions
- Environment Stability - Good UV Stability
- Processability - High Flow, Thin wall Application, Good Surface Appearance
- Electrical Properties - High Dielectric Strength
- Regulatory Compliance & Versatility - Broad Range of Both Filled and Unfilled Grades, with specified UL and other Agency Compliance Ratings.
- Healthcare VALOX™ Resin meet Food Contact and Medical Regulatory Specifications.
VALOX 176 PBT has 1.5 ~ 1.8 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 48
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B120 = 177
Material MFI / Melt Flow Rate
Melt Flow Rate, 250°C/1.2 kgf = 127
Material Melt Volume Rate, MVR
Melt Volume Rate, 250°C/1.2 kgf = 127
VALOX™ 176 Resin has a Flexural Modulus of 2290 MPa. 2 mm/min ISO 178
VALOX™ 176 Resin are Non UL Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.