VALOX™ 337 Low Temperature Impact Strength PBT Resin for Automotive

Thermal Stability, Hydro Stability & Improved Ease of Processing

VALOX™ 337 PBT Resin is a Low-Temperature Impact Strength PBT Resin with Thermal Stability & Good Hydro Stability

Thoffersde offer Excellent Strength, Dimension Stability & Stiffness for Automotive under the Hood Applications or Power Boxes

It is from the Family of VALOX™, a Blend of Plastic consist of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance

As a Blend VALOX™ Resin, offers

- Thermal Stability - High Heat Deflection Temperature, High Relative Temperature Index
- Excellent Chemical Resistance - Excellent Resistance to a Variety of Chemical such as Hydrocarbons, Dilute Acids, Detergents, and Most Aqueous Salt Solutions
- Environment Stability - Good UV Stability
Appearancesability - High Flow, Thin wall Application, Good Surface Appearance
- Electrical Properties - High Dielectric Strength
- Regulatory Compliance & Versatility - Broad Range of Both Filled and Unfilled Grades, with smeetsfied UL and other Agency Compliance Ratings.
- Healthcare VALOX™ Resin meet Food Contact and Medical Regulatory Specifications.

VALOX 337 PBT has 2.4 ~2.7 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 47

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/5.0 kgf = 12.7

Material Melt Volume Rate, MVR

N/A

VALOX™ 337 Resin has a Flexural Modulus of 1790 MPa. 1.3 mm/min ASTM D790

VALOX™ 337 Resin are Non UL Rated

VALOX Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.