BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
VALOX™ 365 Opaque Flame Retardant PBT+PC Blend Resin for Thin Wall
Excellent Chemical Resistant, Non Reinforced & Dimensional Stability
VALOX™ 365 PBT/PC Resin is a Opaque Color, Good Impact Modified Resin with Flame Retardant & Excellent Chemical Resistance
This Unique Resin is an Unreinforced, Impact-Modified Blend of Polybutylene Terephthalate (PBT) and Polycarbonate (PC). This combination leverages the strengths of both polymers:
Polybutylene Terephthalate (PBT): Known for its Excellent Chemical Resistance, Dimensional Stability, and Mechanical Strength. Meanwhile, Polycarbonate (PC): Provides High Impact Resistance and Toughness.
It is from the Family of VALOX™, a Blend of Plastic consisting of either Polybutylene Terephthalate with Polycarbonate Blend Formulation.
VALOX™ 365 PBT/PC Resin is Designed for Thin Wall Applications requiring Robust Impact Resistance and Stringent Flame Retardancy. It offers UL94 V-0 Rating at 0.75 mm. The Unique feature deliver enhances Safety in Applications where Fire Risk needs to be Minimized and Flexibility in Designing thin Wall Product.
As a Blend VALOX™ Resin, offers
- Thermal Stability - High Heat Deflection Temperature, High Relative Temperature Index
- Excellent Chemical Resistance - Excellent Resistance to a Variety of Chemical such as Hydrocarbons, Dilute Acids, Detergents, and Most Aqueous Salt Solutions
- Environment Stability - Good UV Stability
- Processability - High Flow, Thin wall Application, Good Surface Appearance
- Electrical Properties - High Dielectric Strength
- Regulatory Compliance & Versatility - Broad Range of Both Filled and Unfilled Grades, with specified UL and other Agency Compliance Ratings.
- Healthcare VALOX™ Resin meet Food Contact and Medical Regulatory Specifications.
VALOX 365 PBT/PC has 0.8 ~ 1.1 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 121
Vicat Softening Temperature Rate
N/A
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
N/A
VALOX™ 365 Resin has a Flexural Modulus of 2240 MPa. 1.3 mm/min ASTM D790
VALOX™ 365 Resin are UL94 - V-0, 0.75 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.