VALOX™ 430 PBT 30% Glass Reinforced Resin. Non FR & Impact Modified

High Heat, Chemical Resistance with Excellent Balance Properties

VALOX™ 430 PBT Resin is a 30% Glass Reinforced, Impact Modified PBT Material Engineered for applications that demand High Mechanical Strength, excellent Stiffness, and Long Term Dimensional Stability

The Glass Reinforced structure of VALOX™ 430 PBT Resin significantly improves Rigidity and Load Bearing capability, allowing Molded Parts to maintain Shape and Alignment under Continuous Mechanical Stress

Impact Modification enhances Toughness in VALOX™ 430 PBT Resin, reducing the Risk of Cracking or Failure during Assembly, Handling, Vibration, or Repeated Mechanical Loading in Service

VALOX™ 430 PBT Resin is frequently selected for Automotive Structural Brackets, Mounting Frames, Sensor Supports, and Industrial Mechanical Components where Flame Retardancy is not required

UL94 HB rated VALOX™ 430 PBT Resin at Thicknesses from 1.00 mm to 3.00 mm. ROHS Compliance enables the use of this Grade in environmentally regulated Manufacturing Programs

Notes:

VALOX™ 430 PBT Resin
30% Glass Reinforced
Impact Modified
ROHS Compliant Grade

VALOX 430 PBT has 0.30 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 208

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/2.16 kgf = 11.7

Material Melt Volume Rate, MVR

N/A

VALOX™ 430 Resin has a Flexural Modulus of 7810 MPa. 1.3 mm/min ASTM D790

VALOX™ 430 Resin are UL94 - HB, 1.00 mm ~ 3.00 mm Rated

VALOX Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.