VALOX™ 508 PBT/PC with 30% Glass Reinforced Resin. High Heat Thermal

Non FR, Low Warpage, Excellent Mechanical & Chemical Resistance

VALOX™ 508 PBT/PC Resin is a 30% Glass Reinforced Polymer Blend that combines the Chemical Resistance and Easy Processability of PBT with the Superior Toughness and Dimensional Stability of Polycarbonate, Creating a Balanced engineering material for demanding Industrial Use

The Optimized PBT/PC Blend Structure of VALOX™ 508 PBT/PC Resin helps minimize Warpage during processing while maintaining High Mechanical Strength, enabling Stable Dimensional Precision even under Repeated Thermal Cycling and Sustained Mechanical Stress Conditions

Glass Reinforcement further enhances Structural Rigidity and Load Distribution in VALOX™ 508 PBT/PC Resin, making it highly suitable for Load Bearing Components that require Tight Tolerances, Long-Term Performance Stability, and Resistance to Deformation over time

VALOX™ 508 PBT/PC Resin is widely applied in Automotive Frames, Structural Housings, and Industrial Components where Flame Retardancy is not required but High Mechanical Reliability, Impact Resistance, and Dimensional Consistency are Critical for Performance

This Resin achieves a UL94 HB Flammability Rating within a Thickness range of 1.50 mm to 3.00 mm, and is produced in accordance with ROHS Environmental Standards, Ensuring Compliance with Global Regulations and supporting Sustainable Manufacturing Practices

Notes:

VALOX™ 508 PBT/PC Resin
30% Glass Reinforced
Impact Modified
ROHS Compliant Grade

VALOX 508 PBT/PC has 0.30 ~ 0.50 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 176

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

N/A

VALOX™ 508 Resin has a Flexural Modulus of 8000 MPa. 2 mm/min ISO 178

VALOX™ 508 Resin are UL94 - HB, 1.50 mm ~ 3.00 mm Rated

VALOX Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.