VALOX™ 830F PBT/PET Resin Food Contact Regulation Compliant Resin

Excellent Chemical Resistance. Barrier Capabilities to Oxygen or Water

VALOX™ 830F PBT/PET Resin is an Advanced Engineering material Designed for applications requiring High Heat Resistance, Strong Mechanical Performance, and Reliable Compliance with Food Contact Regulations. This Grade combines the Benefits of PBT and PET Chemistry with Reinforcement to support Long Term Stability in demanding Processing and Use Environments

With 30% Glass Reinforcement, VALOX™ 830F PBT/PET Resin delivers Enhanced Stiffness, Strength, and Dimensional Stability under elevated Temperature Conditions. VALOX™ 830F PBT/PET Resin Maintains Structural Integrity during continuous Heat Exposure, making it suitable for Components that must perform Reliably over Repeated Thermal Cycles

Excellent Chemical Resistance is a Key Advantage of VALOX™ 830F PBT/PET Resin, supporting use in Environments with exposure to Oils, Fats, Cleaning Agents, and Food Related Chemicals. VALOX™ 830F PBT/PET Resin helps reduce material Degradation while preserving Mechanical and Surface Properties over Time

Barrier Performance is another Important feature of VALOX™ 830F PBT/PET Resin, offering effective Resistance to Oxygen and Water Transmission. These Barrier Capabilities help protect contents, Improve Shelf Life, and Support Product Integrity in Food Contact and Packaging Related Applications

VALOX™ 830F PBT/PET Resin is developed to meet Food Contact Regulation Requirements while providing a balanced Combination of Heat Resistance, Chemical Stability, and Mechanical Strength. VALOX™ 830F PBT/PET Resin supports the Design of Durable, Safe, and High Performance Components for Food Contact applications with Confidence

Notes:

VALOX™ 830F PBT/PET Resin
30% Glass Reinforced
Impact Modified
ROHS Compliant Grade

VALOX 830F PBT/PET has 0.30 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 195

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B120 = 205

Material MFI / Melt Flow Rate

Melt Flow Rate, 265°C/2.16 kgf = 18

Material Melt Volume Rate, MVR

Melt Volume Rate, 260°C/2.16 kgf = 13

VALOX™ 830F Resin has a Flexural Modulus of 8000 MPa. 2 mm/min ISO 178

VALOX™ 830F Resin are Non UL Rated

VALOX Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.