VALOX™ EH7020HF PBT/PET Metalizing Material Resin with Mineral Filled

High Heat Thermal with Good Impact Strength. Good Surface Finishing

VALOX™ EH7020HF PBT/PET Resin is a General Purpose Non FR Resin 20% Mineral Filled Reinforced for Metalizing Applications.

The Grade offers Good Impact, Dimension Stability & Chemical Resistance with Low Warpage. Added Easy Release

It is from the Family of VALOX™, a Blend of Plastic consist of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance

As a Blend VALOX™ Resin, offers

- Thermal Stability - High Heat Deflection Temperature, High Relative Temperature Index
- Excellent Chemical Resistance - Excellent Resistance to a Variety of Chemical such as Hydrocarbons, Dilute Acids, Detergents, and Most Aqueous Salt Solutions
- Environment Stability - Good UV Stability
- Processability - High Flow, Thin wall Application, Good Surface Appearance
- Electrical Properties - High Dielectric Strength
- Regulatory Compliance & Versatility - Broad Range of Both Filled and Unfilled Grades, with specified UL and other Agency Compliance Ratings.
- Healthcare VALOX™ Resin meet Food Contact and Medical Regulatory Specifications.

VALOX EH7020HF PBT/PET has 1.037 ~ 1.059 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 70

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B120 = 179

Material MFI / Melt Flow Rate

Melt Flow Rate, 265°C/2.16 kgf = 64

Material Melt Volume Rate, MVR

N/A

VALOX™ EH7020HF Resin has a Flexural Modulus of 4710 MPa. 2 mm/min ISO 178

VALOX™ EH7020HF Resin are Non UL Rated

VALOX Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.