BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
VALOX™ HX312C PBT Healthcare Specific Regulation Resin.Mold Release
Excellent Chemical Resistance. Barrier Capabilities to Oxygen or Water
The VALOX™ HX312C PBT Resin is a Specialized Medical Grade Substance created for Strictly monitored Healthcare Sectors where Product Safety and Official Standards are Vital.
VALOX™ HX312C PBT Resin satisfies both USP Class VI and ISO 10993 Benchmarks, Facilitating its application in Clinical Equipment that Demands Verified Biological Safety and Legal Approval.
The Improved Handling ( Easy Release ) of VALOX™ HX312C PBT Resin allows for High Accuracy Shaping, Uniform Exterior Finishes, and Dependable Extraction from Molds throughout the Medical production phase.
The Inherent Chemical Resilience found in VALOX™ HX312C PBT Resin permits frequent Sanitization and Scrubbing Cycles without Hurting its Physical Strength or Precise Shape Holding abilities.
A UL94 HB Classification for VALOX™ HX312C PBT Resin Exists at 1.50 mm to 6.00 mm Thickness, specifying its Flame Response. Meeting ROHS Rules assists in Medical Device Development Schemes.
Notes:
VALOX™ HX312C PBT Resin
Meet ISO 10993 or USP Class VI Regulations
Easy Release
UL94 Rated
ROHS Compliant Grade
VALOX HX312C PBT has 0.90 ~ 1.60 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 54
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B120 = 165
Material MFI / Melt Flow Rate
Melt Flow Rate, 250°C/1.2 kgf = 35
Material Melt Volume Rate, MVR
Melt Volume Rate, 250°C/2.16 kgf = 13
VALOX™ HX312C Resin has a Flexural Modulus of 2400 MPa. 2 mm/min ISO 178
VALOX™ HX312C Resin are UL94 - HB, 1.5 mm ~ 6.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.