top of page

VALOX™ HX325HP PBT Healthcare Specific & FDA Compliance Resin

Meets International Standards of Biocompatibility & Change Management

VALOX™ HX325HP PBT Resin is a Specialized, Unreinforced Polybutylene Terephthalate (PBT) Designed for use in Medical Devices and Pharmaceutical Applications.

Unreinforced Polybutylene Terephthalate (PBT): VALOX™ HX325HP is Composed Solely of PBT without any Reinforcing Fillers such as Glass Fibers or Minerals, which allows for a Balance of Strength, Durability, and Ease of Processing.

VALOX™ HX325HP PBT Resin is formulated to Facilitate Easy Release from Molds, Reducing Cycle Times thus Improving Manufacturing Efficiency.

VALOX™ HX325HP Resin complies with Stringent Biocompatibility Standards, Including ISO 10993 and United States Pharmacopeia (USP) Class VI. This ensures that the Material is Safe for Use in Medical applications where it will come into Contact with Bodily Fluids and Tissues.

The Resin is Compliant with U.S. Food and Drug Administration (FDA) Regulations for Food Contact. This compliant offers Safely used in applications where it Might Come into Contact with Food, ensuring No Harmful Substances are Transferred.

VALOX™ HX325HP PBT Resin can withstand Gamma Radiation, which is commonly used for Sterilizing Medical Devices and Pharmaceutical Packaging.

Furthermore, It is compatible with Electron Beam (E-Beam) Sterilization, a Method that uses High-Energy Electrons to Sterilize Products without the need for High Temperatures or Chemicals.

EtO (Ethylene Oxide) Sterilization is another method the VALOX™ HX325HP PBT Resin can Tolerate. EtO is a Gas used to Sterilize Items that cannot withstand High Temperatures.

Due to these Properties, VALOX™ HX325HP Resin is suitable for a Wide Range of applications in the Healthcare Industry, such As:
- Medical Device Housings and Components
- Pharmaceutical Packaging
- Food Contact Applications
- Any Application Requiring Sterilization and Biocompatibility


VALOX HX325HP PBT has 2.0 ~ 2.2 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 60

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B120 = 185

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/2.16 kgf = 24

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/2.16 kgf = 20

VALOX™ HX325HP Resin has a Flexural Modulus of 2500 MPa. 2 mm/min ISO 178

VALOX™ HX325HP Resin are Non UL Rated

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page