top of page

VALOX™ HX420HP PBT Healthcare Regulation Resin. 30% Glass Reinforced

Great Chemical Durability. Able to Blocks Out Oxygen and Water Vapor

VALOX™ HX420HP PBT Resin is a 30% Glass Reinforced Medical grade PBT material developed for Healthcare Components requiring enhanced Structural Strength

30% Glass Reinforcement in VALOX™ HX420HP PBT Resin improves Stiffness and Load Bearing capability while maintaining Medical Grade Performance Characteristics

VALOX™ HX420HP PBT Resin maintains Dimensional Stability and Mechanical Integrity during Assembly, Handling, and Operational use in Medical Environments. It meet ISO 10993 or USP Class VI Regulations

Typical applications of VALOX™ HX420HP PBT Resin include Medical Equipment Frames, Structural Device Components, and Load‑Bearing Healthcare Parts

This Grade meets ROHS Compliance Expectations

Notes:

VALOX™ HX420HP PBT Resin
30% Glass Reinforced
Meet ISO 10993 or USP Class VI Regulations
ROHS Compliant Grade

VALOX HX420HP PBT has 0.30 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 207

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B120 = 220

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/2.16 kgf = 17

Material Melt Volume Rate, MVR

.

VALOX™ HX420HP Resin has a Flexural Modulus of 8500 MPa. 2 mm/min ISO 178

VALOX™ HX420HP Resin are Non UL Rated

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page