BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
VALOX™ V8280 PBT/PET High Heat Resistance Resin. 40% Glass Reinforced
Non Flame Retardant with Excellent Aesthetic Gloss & Surface Finish
VALOX™ V8280 PBT/PET Resin is a 40% Glass Reinforced PBT PET Blend developed to deliver excellent Strength and High Heat Endurance. VALOX™ V8280 PBT/PET Resin maintains Structural Integrity during continuous Thermal Exposure in challenging Operating Conditions
The PBT PET Blend Structure of VALOX™ V8280 PBT/PET Resin provides Strong Dimensional Stability at elevated Temperatures. VALOX™ V8280 PBT/PET Resin maintains Consistent Shape while preserving Surface Gloss and Visual Uniformity during Extended Heat Exposure
VALOX™ V8280 PBT/PET Resin delivers excellent Aesthetic Gloss and Surface Finish without Flame Retardant Additives. VALOX™ V8280 PBT/PET Resin Supports applications where appearance Quality remains Critical beside Mechanical Performance and Thermal Stability
VALOX™ V8280 PBT/PET Resin is often applied in Automotive Interior/Exterior Components and Consumer Products requiring Heat Resistance with Best Visual Appeal. ROHS Compliance supports use of VALOX™ V8280 PBT/PET Resin in Environmentally Regulated applications Worldwide
Notes :
VALOX™ V8280 PBT/PET Resin
40% Glass Reinforced
Excellent Aesthetic Gloss & Surface Finish
ROHS Compliant Grade
VALOX V8280 PBT/PET has 0.20 ~ 0.05 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 193
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 221
Material MFI / Melt Flow Rate
Melt Flow Rate, 266°C/5.0 kgf = 33
Material Melt Volume Rate, MVR
N/A
VALOX™ V8280 Resin has a Flexural Modulus of 10680 MPa. 1.3 mm/min ASTM D790
VALOX™ V8280 Resin are Non UL Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.